Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Band saw problems
-
24th July 2013, 07:01 PM #1
Band saw problems
Hi guys
I have an Elephant 14 inch band saw which I have just serviced having bought it second hand, so new bearings etc. I have put on the tyres, a new blade and adjusted what I could and tightened up what I could. As I don't know anything about bandsaws I flew blind. I started the machine and the blade and the tyres came off. I spun the wheels a few times and the blade ran true. Now I have read somewhere that one should glue the tyres on. If so, what glue, (Araldite 2 component glue) and if not, what then.
Your input is greatly appreciated which means PLEASE HELP.
Kind regardsWith kind regards and may the wood chips fly
Islander
-
24th July 2013 07:01 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th July 2013, 07:27 AM #2
Are they rubber tires? Rubber tires need glue while urethane tires don't.
-
25th July 2013, 08:35 AM #3
I had an elephant 14" for over 20 years and the tyres definitely weren't glued in also had to replace a tyre on my jet, tight fit, but no glue.
where abouts in brissy are you. If close enough i'll have a peek if you want.
Cheers
Steve
Similar Threads
-
Help with band saw
By reefology in forum BOX MAKINGReplies: 15Last Post: 13th September 2010, 11:27 PM -
Help with band saw
By Red Gum in forum BANDSAWN BOXESReplies: 3Last Post: 12th February 2008, 04:33 PM -
new band saw
By The Old Bloke in forum TRITON / GMCReplies: 3Last Post: 22nd June 2007, 12:53 PM -
Band Saw
By dereg in forum BANDSAWSReplies: 1Last Post: 27th August 2003, 07:07 PM -
Which Band saw
By DavidG in forum BANDSAWSReplies: 11Last Post: 19th May 2003, 08:29 PM