Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Bandsaw keeps cutting out.
-
14th March 2014, 10:01 AM #1
Bandsaw keeps cutting out.
Not under undue load. Goes for a few minutes then stops. Goes again if I repress the button. Its a Schapech I bought 2nd hand. Obviously the reason he sold it I guess. So what are possible causes? Over heating? Stuffed capacitor somewhere? Motor to small? Switch shorting?
Like this one.http://www.machineryhouse.com.au/W856anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
-
14th March 2014 10:01 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
14th March 2014, 12:50 PM #2SENIOR MEMBER
- Join Date
- Sep 2013
- Location
- Jarrahdale WA
- Posts
- 370
I'd start by bypassing the switch and see what happens...
if it still does it then...it's not the switch...
-
14th March 2014, 03:59 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,790
It could still be the switch, gunk may have got in there and after a few minutes the solenoid warms up and can't hold the magnetic breakers closed so it turns itself off.
If you can open it up a blow out with compressed air might do it.
-
14th March 2014, 05:09 PM #4anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
-
15th March 2014, 01:35 AM #5China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,474
I had the same problem with my Woodfast took the #$%^& Chinese switch and threw it in the bin where it belongs replaced it with a "propper" Clipsal item, problem
fixed, that was 3 years ago, also now when I want to use it I don't have to open the stupid little flap
-
15th March 2014, 08:02 AM #6
AM I have had mine now some years and had the problem only one or twice where it seems to trip the safety power board to many thing running at once. (damn modern house power) I have cleaned it (the switch) once and no problem since. There is a chance it could be a faulty micro switch for the door being open. There is an overload (if your pushing to much through) cut out fitted to them also.
Similar Threads
-
Bandsaw cutting wax
By AxelVK in forum METALWORK FORUMReplies: 3Last Post: 19th May 2012, 04:49 PM -
bandsaw cutting funny
By elanjacobs in forum BANDSAWSReplies: 11Last Post: 8th June 2010, 07:49 PM -
Bandsaw For Veneer Cutting
By echnidna in forum BANDSAWSReplies: 49Last Post: 27th October 2007, 06:09 PM -
Circle cutting Jig for my Bandsaw ?
By WillyInBris in forum BANDSAWSReplies: 2Last Post: 9th April 2007, 06:20 PM -
Cutting a bandsaw box...!!,.....a question
By Pauls_49 in forum BANDSAWN BOXESReplies: 7Last Post: 28th July 2006, 01:09 PM