Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Bandsaw Help
-
17th March 2016, 01:08 PM #1New Member
- Join Date
- Mar 2016
- Location
- Gold Coast
- Age
- 47
- Posts
- 3
Bandsaw Help
Hi, wondering if anyone out there might be able to help.
I recently purchased a second hand 9" Bandsaw which needed the tyres replaced. While I was taking the wheels off to replace the tyres (give them a general clean as the previous owner had obviously attempted too also) the spindle for the top wheel sheered off.
I have looked for a serial number etc... on the bandsaw and can't find anything. The name on the front of the saw says "9" Woodworker"
Can anyone point me in the right direction as to where I might able to get parts for it? I am not sure if I have even named the parts right... however here is a couple of images...
I am located on the Gold Coast of Australia.
Thanks in advance
AndrewIMG_1213.jpgIMG_1217.jpgIMG_1219.jpgIMG_1220.jpg
-
17th March 2016 01:08 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th March 2016, 03:44 PM #2New Member
- Join Date
- Mar 2016
- Location
- Gold Coast
- Age
- 47
- Posts
- 3
Ok Further to this...
after more research I have found parts and part numbers of the parts... only they have been discontinued... is there any aftermarket places that anyone can think of?
Elevating Plate PN BS90103100
Shaft PN BS90104600
Adjusting Plate PN BS90103600
The look to be the same as the 9" Ryobi and Craftsman Bandsaws....
Thanks for any help people might be able to provide...
-
17th March 2016, 05:44 PM #3China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
I think your only option will be fabricate a replacement
-
17th March 2016, 07:42 PM #4New Member
- Join Date
- Mar 2016
- Location
- Gold Coast
- Age
- 47
- Posts
- 3
-
8th April 2016, 03:07 PM #5New Member
- Join Date
- May 2012
- Location
- waterford west qld. 4133
- Posts
- 3
Similar Threads
-
Bandsaw Blade Width Selection & Bandsaw bed throat and blade Alignment
By thumbsucker in forum BANDSAWSReplies: 30Last Post: 17th May 2014, 09:06 PM -
You call that a bandsaw? This is a bandsaw
By AlexS in forum BANDSAWSReplies: 18Last Post: 21st June 2011, 12:26 AM -
Bandsaw for only the SMARTEST of Buyers -Bandsaw in Excellent Condition
By prozac in forum BANDSAWSReplies: 4Last Post: 8th June 2008, 06:23 PM -
Will Carbatec bandsaw blades fit Jet bandsaw?
By FlyingDuck in forum BANDSAWSReplies: 2Last Post: 13th May 2006, 06:32 PM -
meat bandsaw or bandsaw
By shakzool in forum BANDSAWSReplies: 9Last Post: 31st May 2005, 07:42 PM