Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Bandsaw Jig problem
-
19th June 2005, 01:36 AM #1
Bandsaw Jig problem
I have made a circle cutting jig similiar to the one described in Violincrafters post.
It is used on the two 20 inch Hafco models that we have at school. On one it cuts perfect circles in both Acrylic and plywood. On the other it runs out and drags the blade away from the jig.
Both machines use the blades made up from the same roll. The blade tension is as near as I can adjust it.
Can readers offer an opinion as to other varibles that could cause this phenomenum.
Thanks
Grahame Collins
-
19th June 2005 01:36 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th June 2005, 10:43 PM #2
variables
Hi,
Without seeing the jig its difficult to tell.
In general the blade has to be exactly positioned to the locating pin. If its to forward the blade will stretch outwards and force itself outwards. If its to far rearward the blade will bite inwards more.
Because you use two bandsaws do you use the same jig? If not then the blade position is incorrect to the centre of the jig on one of them. It seems like a blade setting issue more so than tensioning of the blade! The other offering are the rubbing blocks in good condition to firm the blade from "twist". One other posibility is that one bandsaw has its blade rolling at a different position on the wheel and this may indicate the different characteristic of the two identical saw if they share the same jig. This is only theory but may resolve this issue.
Im basically refering to my jig though
violincrafterLast edited by violincrafter; 20th June 2005 at 07:21 PM.
Gloria in Excelsis Deo Apocrapha the greatest doxology
Similar Threads
-
Another micro-adjustable box-joint jig
By Rocker in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 31Last Post: 29th April 2010, 10:31 PM -
Continuously Adjustable Circle Cutting Router Jig
By simplicio in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 21Last Post: 30th August 2005, 08:07 PM -
Problems with full dove tail jig
By kieran_shanley in forum ROUTING FORUMReplies: 12Last Post: 10th July 2004, 01:52 PM -
resawing jig for bandsaw
By jow104 in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 2Last Post: 18th April 2004, 11:10 PM -
dovetail jig for bandsaw
By jow104 in forum BANDSAWSReplies: 1Last Post: 21st February 2004, 12:21 AM