Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 28
Thread: Bandsaw questions
-
11th February 2007, 01:46 AM #1
Bandsaw questions
G'day bandsaw experts. I notice that, quite often, Bandsaws come up on EBay that are for cutting meat. How are these different from bandsaws for cutting wood?
To save me reading all the Bandsaw posts what is a good one to buy for ripping soft and hard woods to boxmaking sizes (mainly 9, 10, 12 and 16mm).
I have single phase only.
CheersIf you never made a mistake, you never made anything!
-
11th February 2007 01:46 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th February 2007, 07:17 AM #2
I've seen only one, but IIRC the table elevates instead of the upper guide lowering for thickness. Might be a different speed than for wood, but I don't know whether faster or slower. If speed is adjustable, or belt driven with replaceable pulleys, that doesn't matter. Another thing: probably stainless steel on table and maybe column.
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
11th February 2007, 07:28 AM #3
No guides and usually have a mincer attachment!
....................................................................
-
11th February 2007, 10:44 AM #4
thanks guys. Thinking further it may be that meat cutting bs's are less accurate because they only do rough cutting.
A good one to buy then? As per 2nd part of my question?
CheersIf you never made a mistake, you never made anything!
-
11th February 2007, 10:53 AM #5
If you can, take some pics of all the working bits and post them? Never seen one before, so I don't know how different they are. I'm sure they would have the same working parts, except for maybe the blade guides.
I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
-
11th February 2007, 11:25 AM #6
-
11th February 2007, 11:48 AM #7
Just about covered it all I think. Most meat bandsaws will have a stainless sheet folded for the table. Guides will pretty well be non-existant, usually one crappyish one below the table. You wouild also need to have tyres fitted to the pulleys, as they are just cast aluminium.
I may be wrong, but I think I remember saying he has a meat saw for his bandsaw. It has a bigger throat and overall capacity compared to a traditional wood BS. He modified it and put guide blocks or bearings or something and reckons it is the ducks nuts.Boring signature time again!
-
11th February 2007, 02:36 PM #8
OK
To save me reading all the Bandsaw posts what is a good brand to buy for ripping soft and hard woods to box making sizes (mainly 9, 10, 12 and 16mm).
I have single phase only.
CheersIf you never made a mistake, you never made anything!
-
11th February 2007, 03:00 PM #9
If I was contemplating buying a piece of machinery I would be happy to read everything I could on the subject and not be so bloody lazy.
Boring signature time again!
-
11th February 2007, 03:14 PM #10
What woodworking machine outlets do you have available in Tassie?
I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
-
11th February 2007, 04:14 PM #11
-
11th February 2007, 04:17 PM #12
-
11th February 2007, 04:20 PM #13
Bunnings, Mitre 10, Specialised Machinery (stock carbatec stuff), Nubco, a few other palces that just sell machinery so I guess If I got a recommendation one of them would stock it. I'd be looking at a free standing one though. One that will produce slabs of uniform thickness to reasonably accurate dimensions. I know that the guide roller quality is crucial so that would be a consideration. I'm also looking at a thicknesser, Dewalt, Hitachi or Makita have been recommended to me. My BIL works at Bunnings and can get a reasonable staff discount. They don't stock decent bandsaws though.
CheersIf you never made a mistake, you never made anything!
-
11th February 2007, 04:32 PM #14
If you can get a BP 16A ordered in, then I recommend that.
It has the largest throat capacity (380mm) and the highest resaw capacity(excluding a riser kit, which can make the frame a little more flimsy) in the $600- $900 price range. It also has a 2HP motor.
Plus, all the potential issues and solutions with this saw are all here on the board.
This is my heavily biased opinion.
........................quick, run, here come the "Jet" brigade.I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
-
11th February 2007, 04:37 PM #15If you never made a mistake, you never made anything!
Similar Threads
-
Bandsaw speeds
By HappyHammer in forum BANDSAWSReplies: 5Last Post: 13th November 2012, 08:54 AM -
What to look for when buying a second hand bandsaw
By felixe in forum BANDSAWSReplies: 20Last Post: 4th December 2006, 09:27 PM -
Jet or Carbi-tech bandsaw
By Paul B in forum BANDSAWSReplies: 18Last Post: 20th October 2005, 11:54 PM -
Bandsaw and Lathe Purchase - Urgent Help Required
By CameronPotter in forum BANDSAWSReplies: 7Last Post: 8th September 2005, 10:47 AM -
Lessons (not so serious) in Bandsaw Buying
By paul.cleary in forum BANDSAWSReplies: 1Last Post: 4th December 2004, 12:39 PM