Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
24th July 2013, 06:45 PM #1Intermediate Member
- Join Date
- Sep 2008
- Location
- Frankston, Vic
- Posts
- 30
Bandsaws and carbide blades- help required.
Hi All,
I'm in the market for a bandsaw. An 18" would suit my needs. It will only be used for re-sawing hard woods and would like to use one of those nice carbide blades.
My problem is that a blade manufacturer stipulates a blade tension of 30,000 PSI. and that lack of tension in the blade is apparently the main cause of poor cuts. Bandsaws that I have looked at are generally around 20,000PSI.
I understand that the Laguna LT 18 3000 model will probably work but their price has jumped $300 then there is the freight cost from Qld. I would prefer an 18" to a 14" machine.
To anyone out there currently using an 18" machine with a carbide blade please post your thoughts.
Thanks
highland
-
24th July 2013 06:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th July 2013, 05:27 PM #2
I have a 21 inch bandsaw with a 1" 2tpi tungsten carbide-toothed blade. I cant see why the same could not be run on an 18" saw. I would not think it a good ideato run it on a 14" saw thaoug, the curve around the wheels would be a bit too tight and would probably quickly cause fatigue in the blade. It would of course fatigue faster on your 18" saw than on my 21" saw though. but I think you would still get plenty of life out of it.
Hope this helps
DougI got sick of sitting around doing nothing - so I took up meditation.
Similar Threads
-
help required to get wolf jigsaw blades
By wuzatrewunce in forum WOODWORK - GENERALReplies: 0Last Post: 23rd November 2010, 08:32 PM -
Carbide tooth Bandsaw blades
By Ron Booth in forum BANDSAWSReplies: 5Last Post: 29th September 2009, 02:22 PM -
Help required with spokeshave blades
By Woodwould in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 2nd November 2008, 03:51 PM -
Carbide Tipped bandsaw blades
By Chris Vesper in forum BANDSAWSReplies: 13Last Post: 9th March 2008, 02:37 PM -
Carbide tipped blades
By savage in forum HINTS & TIPSReplies: 9Last Post: 22nd October 2005, 07:18 PM