Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Bansaw improvement
-
21st March 2003, 12:01 AM #1Senior Member
- Join Date
- Aug 2002
- Location
- albany West Australia Australia
- Posts
- 133
Bansaw improvement
I have had my 14in bandsaw for a couple of years and was never totally happy with the tension and tracking. I had been getting the blades from another source, ordering by mil length.
I ordered a couple of new blades from Henry Bros in Sy for the first time and fitted one today. I could not believe that it was the same saw. It tracked beautifuly and cut smooth. ( I am cutting Jarrah Burl with a 3/16th 6tpi. On investigation I found that the previous supplier was not accurate in the measurements, he had them about 5mil too long. This problem had a domino effect on both tracking and tension. I just thought I would let you know in case anyone else had the same problem that I had.
Cheers
Alf
-
21st March 2003 12:01 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many