Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: BP300 or BAS-350 please help
-
3rd June 2005, 07:09 PM #1
New Member
- Join Date
- Jun 2005
- Location
- sunshine coast, Australia
- Posts
- 8
BP300 or BAS-350 please help
Hey all im new to the site and i have a couple questions,
1- which of these two saws is the beter one?
2- will a 1/8 and 1/16 blade fit on these two machines with the blade guides that come standard......will my existing fine blade guide from Gregory machinery fit on these bandsaws if not what is on the market that will do the same job,
i mostly do fine scroll work. any ideas would be greatly appreciated
-
3rd June 2005 07:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd June 2005, 10:13 PM #2
Senior Member
- Join Date
- Aug 2002
- Location
- albany West Australia Australia
- Posts
- 133
Firstly you must tell us what you want to use it for. If you want to use a 1/16th blade stick to your scroll saw because that blade will cut through the rubber on your wheels.
I have a bas350 and the smallest blade that I use is 3/16th
Alf
-
5th June 2005, 01:32 PM #3
New Member
- Join Date
- Jun 2005
- Location
- sunshine coast, Australia
- Posts
- 8
thanks for the reply
i mostly use my bandsaw for boxes and cutting out jewellery(Ebony, cocobola, osarge etc)
im using a 1/8th blade at the moment with the fine blade guide on my 14"sherwood but it is on its lasts legs so im looking to upgrade (bandsaw).
Will the fine blade guide fit on the BAS 350 or are the standard guides sufficient
to run a 1/8 blade accuratly.
thanks for your time.
Reply With Quote
