Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Need to buy a bandsaw!
-
31st March 2006, 08:26 PM #1
Need to buy a bandsaw!
Looking at getting a decent bandsaw next week. There are a couple at carbatec melb that look ok.
Either this 2 speed job
http://www.carbatec.com.au/store/ind...80_320_540_560
or
The heavy duty 14"
http://www.carbatec.com.au/store/ind..._320_490_19205
I make guitars to give a clue as what I would use it for.
It would need to be able to accurately slab 8x2" dry hardwood such as rock maple etc and be able to cut reasonable mitre / crosscuts on short lengths up to a metre.
Would be grateful for any inputray c
dunno what's more fun, buyin' the tools or usin' em'
-
31st March 2006 08:26 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
31st March 2006, 09:30 PM #2
Slab 8x2 in what way... 8x1? If so those BSaws are too small, they have a max cut of 200mm and not really enough Hp to do the job without straining the motor heaps, an 8" cut is hard work...
You'd be better off with a http://www.timbecon.com.au/details/1...saw-13381.aspx
or
http://www.timbecon.com.au/details/1...saw-13382.aspx
if you want to stay with Carb's... http://www.carbatec.com.au/store/ind...80_320_580_590....................................................................
-
31st March 2006, 09:55 PM #3GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
I'd recommend one of the 'CE' Carbatec bandsaws in the 17" range - the main reason I don't have one is I couldn't get it into my garage/workshop - entry door too low to go in upright & concrete ceiling too low to allow me to stand it up if it came in on its side
I got a Delta 14" and put a frame extension in, along with a new spring - one of the 'CE' saws wold have been a LOT easier and no more expensive in the long run,
Similar Threads
-
Bandsaw speeds
By HappyHammer in forum BANDSAWSReplies: 5Last Post: 13th November 2012, 08:54 AM -
Good bandsaw buy?
By TassieKiwi in forum BANDSAWSReplies: 2Last Post: 2nd March 2006, 11:57 PM -
14" Bandsaw, What to buy.
By Ticky in forum BANDSAWSReplies: 17Last Post: 24th February 2006, 01:20 PM -
What bandsaw do I buy for blank cutting?
By dirkmartin in forum WOODTURNING - GENERALReplies: 1Last Post: 10th October 2003, 12:49 PM -
Which Bandsaw to buy ?
By Kerry Blue in forum BANDSAWSReplies: 7Last Post: 4th July 2001, 06:57 PM