Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Carba-Tec BAS 350 Bandsaw Manual
-
30th July 2011, 12:25 AM #1New Member
- Join Date
- Jul 2011
- Location
- ACT
- Posts
- 3
Carba-Tec BAS 350 Bandsaw Manual
Greetings All,
A few years agao when I was living in Tamworth my shed was flooded by about 6" of water and I had forgotten that the manual for my bandsaw was stored in the machine's storage cupboard which was filled with water.
Found a very stiff and unreadable lump of paper the other day when I went to change the perished lower wheel tyre. Had no luck separating the pages and am in need of a copy of the instruction manual. I asked Carba-Tec (Sydney) when I ordered the new tyres but they didn't have a copy on hand.
I saw that someone had a similar request about five years ago on this forum, so hopefully a soft copy is floating around somewhere.
Cheers,
FV
-
30th July 2011 12:25 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th July 2011, 08:37 PM #2Bloke
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 42
Carba-Tec BAS 350 Bandsaw Manual
G'day FV if you go to the Grizzly site (below) you should/maybe find the bandsaw which is the same as yours and can then download the manual.
Grizzly.com® -- Product Categories
Marty
-
4th August 2011, 09:52 PM #3New Member
- Join Date
- Jul 2011
- Location
- ACT
- Posts
- 3
Stompa,
Thanks for your tip. Looked through the Grizzly web-site and whilst the bandsaws were similar, the thrust bearing on my machine is set up 90 degrees out with the back of the blade running on the rim and not the face of the bearing.
However, there is enough info to hopefully get it all up and running true.
Cheers,
FV
Similar Threads
-
Manual for a ryobi hbs 100 bandsaw
By stepen paul hay in forum BANDSAWSReplies: 21Last Post: 3rd April 2018, 01:08 PM -
Griggio sna640 bandsaw manual
By mark56 in forum BANDSAWSReplies: 1Last Post: 4th July 2011, 09:51 PM -
Carba-tec MJ2325B TS manual
By Tung tied in forum TABLE SAWS & COMBINATIONSReplies: 0Last Post: 26th June 2009, 09:51 AM -
Manual for ISIS bandsaw
By AJ in forum BANDSAWSReplies: 0Last Post: 4th September 2007, 09:26 PM -
New Carba-Tec Bandsaw
By Bruce101 in forum BANDSAWSReplies: 0Last Post: 16th May 2006, 12:45 PM