Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
-
27th April 2020, 07:38 PM #1New Member
- Join Date
- Oct 2014
- Location
- Ballarat
- Posts
- 8
carbide bandsaw blade sharpening service
I own a Laguna 14" bandsaw and have a blunt carbide resaw king blade . After many fruitless searches in Vic and NSW ,for a saw service who had the equipment to sharpen a carbide tipped bandsaw blade
I located Bendigo Saw Sharpening in 16 Belle Vue Rd., Golden Square . They have the right equipment AND their price is very reasonable . I have seen many posts from other frustrated woodies stuck with a similar blade .
Hope this info helps a few out .
-
27th April 2020 07:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th April 2020, 09:14 PM #2GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,014
Can I ask what it costs roughly?
Don't Henry Bros sharpen? I know they supply the blades.
-
28th April 2020, 11:15 AM #3New Member
- Join Date
- Oct 2014
- Location
- Ballarat
- Posts
- 8
Hi Bernmc ,
I Was quoted under $50 ,my blade is in transit to them at mo. I spoke to Mark who was quite happy to provide this service .
Henry Bros quoted $190.00 to resharpen and were not really interested in smaller blades ,they work mainly with saw mill sizes ,hence our 115 inch blades are too fiddly and require rejigging of their sharpener .
If you live in Vic. I also found Mcdiven saws in Williamstown have 50 odd yrs of experience with what we want , but dont sharpen . So I buy there and sharpen in Bendigo .The things you do !!
-
28th April 2020, 06:06 PM #4
I gave up trying to get my King Resaws done so I bought Lennox Blades (from Henry Bros from memory) to replace them. Much cheaper from memory and the quality was excellent. Sadly, I no longer have the Laguna SUV 14 the were for.
If you never made a mistake, you never made anything!
-
28th April 2020, 09:03 PM #5GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,014
My 19mm lennox was $180 (recent buy). The King would have been double that. 'Regular' blades from Felder are $44...
So the lennox needs to last more than 4 x longer than a normal blade to make it cost effective (that's not counting how well it cuts/how nice it is to use). The King would need to last 9x as long...
If sharpening @ $50 got double the life out of it, it would start to look a bit better.
But I do wonder whether just buying a normal blade (or getting 100m roll and making my own) might be just as good/cost effective. I'll let y'all know in a year or two!
-
28th April 2020, 11:38 PM #6
I have sharpened my carbide blades (1" 1.3 tpi Lennox Woodmaster CT) using a Dremel and a diamond disk.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
29th April 2020, 12:48 PM #7
Ah!
Did this! There is a jig I used and a cheap diamond file. Let me get the right links and products.
Worked ABSOLUTELY BRILLIANTLY.
edit - Here - Darren Oates made one that is exactly the same in function: Sharpening Your Bandsaw Blades - Australian Wood Review
I think I gained the original idea some years ago after talking here about exactly this problem of sharpening carbide on my RSK for the SUV14". I've since moved to Lennox Woodmaster CT blades, which IMO are better (and cheaper).
Nothing wrong with the RSK, but I had one snap not too far into its life and well, it cost a lot to fix and it broke again soon after - too short for a re-re-fix.
The touch ups take no time at all. The jig is dead easy to "tune". I took my diamond plates off the red sticks sold at Bunnings.
-
22nd November 2020, 11:51 AM #8New Member
- Join Date
- Nov 2020
- Location
- Canberra
- Age
- 67
- Posts
- 6
Try Fitch saw sharpening in Fyshwick Canberra.
-
23rd November 2020, 11:56 PM #9
Combined Saw and Knife in Deception Bay Qld do them as well. Sharpen that is.
There ain't no devil, it's just god when he's drunk!!
Tom Waits
-
24th November 2020, 10:12 AM #10GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
I am interested in how much work was done to cause the RK blade to be declared blunt. I have Lennox carbide that I bought from Henry Brothers some years ago and it appears to still be in good condition. I know it is hard to compare one user's experience with blades to another but the question remains, just how much work they really do compared to a bi-metal conventional blade.
CHRIS
-
24th November 2020, 03:05 PM #11
My experience is that the carbide saws are absolutely worth 100 times the price.
The cut is without compare, the noise is less, they are dead easy to sharpen (using the jig above) and they dont cost much more.
My first was the RSK, which was impressive. After a LOT of work I had it sharpened by Henry Bros. Fitches (Canberra local) would not do it. It then did even more work.
After each days use it was de-tensioned.
After it snapped twice (same place) and became too short due to the repairs I bought the WoodMaster. It is absolutely as good as the RSK and I would unhesitatingly buy another if needed.
I dont remember the price, but I would *guess* that it was 1/3rd the price of the RSK.
My personal opinion? The Lennox has now done more work, is still on the same sharpen and it showing no sign of fatigue.
-
5th December 2020, 04:53 PM #12Senior Member
- Join Date
- May 2009
- Location
- NSW
- Posts
- 489
One of the problems with bandsaw blades is that they fatigue and finally fail They often fail at the butt weld where the band is joined or they develop "gullet cracks", hair-line cracks that start in the gullet of the blade. Some sharpening machines for conventional blades actually grind down part of the gullet to remove these fine cracks before they go too far and the blade fails. The other thing is the diameter of the bandwheels in relation to the thickness of the blade. Thick blades need big wheels to minimise the sharpness of the bend the blade has to endure each revolution. As the band gets wider it also gets thicker and sometimes the wheel diameter to blade thickness ratio gets exceeded and the blade fails prematurely. Once again, there are some magic numbers you need to look for to get the best combination of wheel size to blade size for long life.
The tungsten tips may well still be sharp but the steel band that they are bonded to could easily just die of fatigue due to a poor choice of materials and wheel sizes.
-
5th December 2020, 04:58 PM #13Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
5th December 2020, 07:53 PM #14Senior Member
- Join Date
- May 2009
- Location
- NSW
- Posts
- 489
Too true Derek, most bandsaws that are small enough to fit in a garage and cheap enough to afford are totally unsuitable for running wide (which generally means thicker) blades. If you put enough tension on them to get the blade tensioned correctly they will probably bend somewhere embarrassing or the blade will fail prematurely due to being flexed more than it was designed to.
-
9th December 2020, 08:26 PM #15
I run a 18mm 3tpi tungsten blade when the work calls for it. The blade that I use most is a bi-metal 3/8 3 tpi. I have a couple of finer blades but they hardly get used.
There ain't no devil, it's just god when he's drunk!!
Tom Waits
Similar Threads
-
Bandsaw Blade Sharpening
By royflatmate in forum BANDSAWSReplies: 18Last Post: 9th January 2020, 09:15 PM -
WEST AUST AS new Carbatec bandsaw with Lennox Tri -master carbide blade
By TP1 in forum WOODWORK - Tools & MachineryReplies: 7Last Post: 13th December 2018, 07:14 PM -
Bandsaw Blade Sharpening
By newjon in forum SMALL TIMBER MILLINGReplies: 0Last Post: 21st July 2013, 09:09 PM -
Bandsaw Blade Sharpening
By pmcgee in forum BANDSAWSReplies: 24Last Post: 7th October 2012, 06:33 PM -
Bandsaw blade sharpening
By DavidG in forum BANDSAWSReplies: 9Last Post: 17th October 2005, 01:31 PM