Thread: Who was harvey bandsaws

Have you a dealer somewhere close, seems to me an unusual toss up between a 15" and an 18" machine.
Get the biggest wheels you can would be my motto.
Guessing its this new detensioning switch that must be on both, has everyone swayed?
I just use a stick against the blade for that, but I have quite a big table on mine.

I can't say I'd ever want a titanium nitride coating on anything like that, but I presume that is optional.

If your not in a basement or have a very low ceiling...
Ya'know, up to a compact 20" machine will still have the same footprint, something around 200kg should be sufficient for an inch blade, say if you want to use a 3/4" comfortably, and likely no more difficult to move due to the span making leverage easier.

Tom