Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: hyco bandsaw
-
4th November 2004, 04:16 AM #1
hyco bandsaw
hi everyone
I am new to this group and woodworking in general.
i have a hyco bandsaw and would like to know if anyone has heard of the brand and what horsepower motor you would need.
It is 1950,s vintage i think , the frame is cast and it weighs a ton.
Any sugestions on making a stand for it and how high should the table be from the ground.
I retrieved it from my dads shed after he passed away aswell as a paulcal combination table saw and jointerLast edited by RETIRED; 5th November 2004 at 11:37 PM.
-
4th November 2004 04:16 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
21st January 2005, 09:52 AM #2New Member
- Join Date
- Jan 2005
- Location
- Sydney
- Posts
- 1
Hyco Bandsaw Info.
Farmboy,
Hyco or Dyco.? Hyco made in Australia and Dyco in NZ. Please advise.
-
21st January 2005, 12:39 PM #3
hyco made in sydney ,12 inch wide cut and 6 inch hight, bloody heavy
-
14th April 2009, 05:29 PM #4New Member
- Join Date
- Mar 2009
- Location
- Cherrybrook NSW
- Age
- 77
- Posts
- 1
Have the same machine.Will check it out and let you know. What length blade is on your machine? Mine came with steel stand but I feel it is too low.Had it retyred with moulded polyurethane some years ago but not the best move.Set it to a height that suits you,somewhere between waist and chest height for the table.Good luck.
-
18th April 2009, 08:22 PM #5
Hi Burto46
the hyco is up and running,a retired saw sharpener fitted some blades built a stand and fitted a vintage 1/3 hp motor to match .,it cuts wood like butter
cheers
greg
-
17th April 2010, 07:49 PM #6New Member
- Join Date
- Apr 2010
- Location
- Brisbane, QLD, Australia
- Posts
- 1