Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Lump of RT
-
17th April 2014, 01:03 AM #1
Lump of RT
Just a few pics of cutting some veneers of rain tree from a reasonable size piece, because of the size I decided it would be best to make up a roller to help keep the piece on the fence, worked rather well too.
lump of raintree.jpgspring loaded roller .jpgside view roller.jpgfinished cut.jpg
Pete
-
17th April 2014 01:03 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
4th May 2014, 09:26 AM #2Senior Member
- Join Date
- Dec 2004
- Location
- Perth
- Posts
- 324
That's great! Is it sprung or fixed?
-
4th May 2014, 09:32 PM #3
Hi Dale, the roller arm is sprung, if you look closely you will see one leg up against the bolt and the other up against the roller arm, there's 3 or 4? turns around the pivot (with red paint on it) it was a torsion spring out of something I pulled apart, might need that one day
The top arm is fixed and acts as a stop to prevent the roller arm from moving too far back into the path of the returning wood.
Pete
-
5th May 2014, 04:15 PM #4Senior Member
- Join Date
- Dec 2004
- Location
- Perth
- Posts
- 324
Definitely stealing that idea. Thanks!
Similar Threads
-
A lump of green Elm going begging, Melb.
By rsser in forum WOODTURNING - GENERALReplies: 7Last Post: 26th February 2011, 08:35 PM -
Joining a lump of 6 x 6 pine
By Strungout in forum WOODWORK - GENERALReplies: 1Last Post: 27th April 2010, 03:48 PM -
How to find the best centre on an irregular lump?
By rsser in forum WOODTURNING - GENERALReplies: 23Last Post: 1st December 2008, 04:28 PM -
Big Lump of Cedar
By BowlingBall in forum TIMBERReplies: 4Last Post: 27th August 2008, 11:08 AM -
Want to have a whirl at a large lump of timber
By Wild Dingo in forum WOODTURNING - GENERALReplies: 12Last Post: 2nd July 2007, 01:45 AM