Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Metal Cutting Bandsaw Blade.
-
21st February 2012, 04:31 PM #1
Metal Cutting Bandsaw Blade.
Hi All,
I'm after a bit of info. Lucky enough to have some M C B Blade.
On the Packet, some of the Paper with the Makers name on it, has been torn of.
So all that is there is " M.....utting " I'm guessing on the U, as it it is not very clear.
Also written is " Sheffield, England ". It is 1/2in. 10Teeth per Inch.
It also seems to have a bit of age on it, as it has been knocked around a bit, but in a Plastic Blade Holder, that held 100ft. of Blade.
The blade is in good condition, & no rust showing.Regards,
issatree.
Have Lathe, Wood Travel.
-
21st February 2012 04:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
21st February 2012, 09:04 PM #2
This blade material could also be MEAT CUTTING.
Just a thought, 10teeth to the inch, sounds about right for meat ,
Jeff
vk4
-
22nd February 2012, 08:12 PM #3
Got the PM, you are probably correct, and at 4 TPI should be good for re-sawing timber.
Jeff
Similar Threads
-
Upright Bandsaw for cutting metal
By Sterob in forum METALWORK FORUMReplies: 10Last Post: 11th May 2011, 09:16 PM -
metal cutting blade.
By pugwash in forum BANDSAWSReplies: 8Last Post: 19th November 2009, 08:47 AM -
Metal cutting bandsaw accuracy
By Tiger in forum METALWORK FORUMReplies: 8Last Post: 27th May 2008, 04:53 PM -
wood bandsaw for metal cutting
By Oldhack in forum METALWORK FORUMReplies: 18Last Post: 25th April 2007, 12:34 PM -
metal cutting blade for corr iron in triton??
By lockboy16 in forum TRITON / GMCReplies: 7Last Post: 7th June 2005, 11:27 PM