Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 45 of 65
Thread: Mods to my hammer n4400
-
26th October 2013, 05:00 PM #31
Hi
I have 3 + 1 maybe for the miter fence 2nd run.
The run will be put back a bit as I need to some work on the cnc first.
I will keep you up to date.
Rvapourforge.com
-
26th October 2013 05:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
31st October 2013, 03:11 PM #32
The next run is going ahead now. So if you have not already PM me do it now.
If you are wanting a higher fence plate for for the ones already out there PM me, cost is $15 plus postage of $5
I have done a deal with the hammer BS importers to supply them with these fences. So after this run they will not be available at wholesale and I will have to sell them nearer a retail price.
So last time offer at $75
Rvapourforge.com
-
31st October 2013, 05:21 PM #33
Rus, how much for both fences and the mitre?
Pat
Work is a necessary evil to be avoided. Mark Twain
-
2nd November 2013, 01:26 PM #34
Pat
A extra $15 for a total of $90 and you get both fence plates, 25mm and 50mm, and the mitre fence.
Or have any one of the fence plate and mitre for $75.vapourforge.com
-
5th November 2013, 09:44 AM #35
Mitre fence buy PM problem
Hi
I have had some members with problems with the PM if in doubt email me at (With the correct symbol for the '(AT)' ) russell(AT)vapourforge.com
I will reply to every one in a few days who has come through on the bank account as confirmation.
Cheers
Rvapourforge.com
-
7th November 2013, 09:57 AM #36
Hi
I have just sent out conformation Pm and Emails to all the payments received.
If you have paid and not got a confirmation let me know.
Or you have not made you payment as yet, Also let me know for my numbers to be made.
the mitre have started to be made
Cheers
Rvapourforge.com
-
11th November 2013, 03:21 PM #37
New mitre fence orders
Hi
Any new orders will have to be at $110 (plus $15 postage) as per my agreement with the bandsaw supplier.
He is not selling the inserts so there will stay at $15 each plus $5 postage.
Cheers
Russellvapourforge.com
-
13th November 2013, 08:45 PM #38
2nd run update
Hi guys
Well it's all over bar the shouting as they say.
All the mitre parts have been cnc out. Some tapping, countersinking and a clean up to go. Have to duct down the hill tomorrow as I broke my last 5mm tapp... Best have lunch while I am out
Still to make the inserts, but they can be done while I finishing the fences off
Aiming for the post end of the week or monday.
Cheers
Rvapourforge.com
-
15th November 2013, 10:58 AM #39
Baffle?
R,
Been following this thread with interest.
With your baffle where's the outlet?
Thanks,
GarethAnnular Grooved Nails....Ribbed for the Woods Pleasure?
-
15th November 2013, 05:25 PM #40
Hi
I did a little oops on one of the mitre fences.....
The engraving one two of the degree numbers is a little deep .7mm instead of .3mm deep... see pic....Note the s/r number it had to happen on this one so this will only make good thing from now on.
So I am wondering if someone who is in the 2nd run will take this one if I throw in a insert????
Cheers
Rvapourforge.com
-
15th November 2013, 05:31 PM #41
Gareth
"With your baffle where's the outlet?"
It is on the right hand side see pic
Cheers
Rvapourforge.com
-
15th November 2013, 05:57 PM #42
R,
Aha! First pic looked almost like it went behind.
Thanks.
GAnnular Grooved Nails....Ribbed for the Woods Pleasure?
-
17th November 2013, 04:00 PM #43
-
17th November 2013, 04:38 PM #44
Russell, do you mean .4mm deeper on the Left Hand 30 & 40 degree markers?
Doesn't worry me, as it looks not to affect the performance and accuracy of the mitre gauge.
I'll take it, to save you making another one.
Anyway, what's 0.4mm between friendsPat
Work is a necessary evil to be avoided. Mark Twain
-
17th November 2013, 06:57 PM #45
Hi Pat
That all is 0.4mm deeper..... all still accurate.
And for this you get yourself a spare insert.
Thanks
Rvapourforge.com
Similar Threads
-
Do you own a Hammer N4400 bandsaw
By FlyingDuck in forum BANDSAWSReplies: 54Last Post: 4th January 2018, 02:47 AM -
review of hammer N4400
By Zed in forum BANDSAWSReplies: 20Last Post: 16th October 2006, 07:43 PM -
Hammer N4400 BS - Q for Felder
By Zed in forum TABLE SAWS & COMBINATIONSReplies: 10Last Post: 26th September 2006, 11:15 AM -
Hammer N4400 Bandsaw
By eddie the eagle in forum BANDSAWSReplies: 0Last Post: 4th July 2006, 08:59 AM -
Hammer N4400 review
By AlexS in forum BANDSAWSReplies: 5Last Post: 13th June 2006, 10:50 PM