Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Perless bandsaw
-
15th December 2003, 07:29 PM #1
Perless bandsaw
Hi all,
I have just been given a 1982 14" perless bandsaw but require a few spares eg:rubbers for wheels and pivots for table but having lot's of trouble finding a supplier in eastern vic does anyone know where I could possibly source these from (anywhere)any help will be greatly appreciated.
Thanks
Woodchip :confused:Turner of good wood into sawdust.
-
15th December 2003 07:29 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th December 2003, 01:59 AM #2
Woodchip
Check out the carbatec PERTH site at www.carbatecwa.com.au and go to bandsaw spares. They have pictures of the spares, so that you can see what you order. They have some more spares, not listed as they keep a complete range of spares for all the saws that they sell. I attended a 'bandsaw setup demo' there last Saturday morning and we were told about the spares they carry.
Good luck
Cya
Joe
-
16th December 2003, 09:01 AM #3
Try ....
GPWNow proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.
-
16th December 2003, 10:06 AM #4
Hi Woodchip,
Leda Machinery maybe worth a try also. They are meant to have one of the largest range of spare parts in S.A.
Not sure if they have what your after, but the people down there are extremely helpful & a pleasure to deal with.
Not sure if they have a website but might pay to give them a ring.
Cheers & have a safe Xmas
Woodchuck
-
20th December 2003, 10:18 PM #5
gatiep,Sir Stinkalot and Woodchuck,
Thanks for you reply's i have contacted gpw and they can help with the parts i require once again many thanks.
WoodchipTurner of good wood into sawdust.
-
21st December 2003, 10:16 AM #6
Great to hear you are able to get the parts
Have a safe Xmas
Woodchuck