Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Quality of 12mm blades.
-
23rd April 2015, 07:57 AM #1GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Townsville. Tropical Nth Qld.
- Posts
- 1,244
Quality of 12mm blades.
I have run out of the blades my local saw doctor made for me (he is now deceased) and I now have the choice of Starrett or Excision from a new supplier. Do any of you know if these brands are any good, or do you just take pot luck when buying blades.
rgds,
Crocy.
-
23rd April 2015 07:57 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
24th April 2015, 01:37 AM #2
Blades.
Hi Crocy,
I like Hackasson? blades, skip tooth.
McDiven Saws, Williamstown, Melb. Vic. make all kinds of blades, & have a great Postal Service.
You ask, you get. They will sell Starrett , but are not happy about them, well, that is what he told me at the time.
I'm now using a German Blade.
I think the Swedish Hackasson Blades is a better blade. I buy 2375mm.(14in saw) 3/8in. x 6TPI Skip Tooth = $12.80 ea.
Of course, most will tell you to get the Bi-metal Blade, a lot dearer, but last a fair bit longer.
Anyway somebody will tell you about them.
Do you really need a 12mm. Blade, as a lot of Woodies use 1/4in.
Me, I'm too rough on my saw, so I like the 3/8in. 6TPI, you can cut round timber with 1 hand, 4TPI you need a cradle.Regards,
issatree.
Have Lathe, Wood Travel.
-
24th April 2015, 09:51 PM #3GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Townsville. Tropical Nth Qld.
- Posts
- 1,244
Hi issatree,
Thanks for that info. I get the blades for the big saw from Henry Bros but I was going to get the 12mm ones from one of the places in Brissie to reduce freight, but I found its the same cost all along the east side. I need to run 12mm as this is an old meat saw and the blades run on a step in the wheels, so you can't substitute any other width. I was a bit dubious about what was offered so I will check some other supplier's. Thanks for your reply.
Rgds,
Crocy.
Similar Threads
-
Quality bandsaw blades in Europe?
By pidizvikus in forum BANDSAWSReplies: 5Last Post: 15th August 2014, 12:48 AM -
4 inch saw blades where from and quality too !
By Dave Lister in forum TABLE SAWS & COMBINATIONSReplies: 24Last Post: 6th October 2009, 06:06 PM -
Where to buy quality 16" thicknesser blades
By Scribbly Gum in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 4Last Post: 6th December 2008, 12:50 PM -
Cheap good quality plane blades
By Clinton1 in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 23rd February 2006, 09:17 PM