Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 25
Thread: Sawstop Bandsaw
-
23rd October 2009, 12:05 PM #1
Sawstop Bandsaw
Talking to the bloke doing the Sawstop demo at the Melb WWS and he mentioned that Sawstop are doing a bandsaw along the lines of the c/saw.
[ame=http://www.youtube.com/watch?v=W3PLwNccpXU]YouTube - SawStop Bandsaw Prototype[/ame]
For the life of me I can't see a need for it, as I and others I was talking with at the time agree that it's one of the safer machines in the shed and you can get up real close if you want to without too much drama.
Yep, there's a danger in all things with sharp teeth. But I don't see a market - of course there might well be in circumstances where there is training in schools etc., but in the wider community?
I'm not starting this thread to bag Sawstop out but wondering what sort of market there might be and if any of you lot might consider a Sawstop b/saw?
-
23rd October 2009 12:05 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
23rd October 2009, 12:51 PM #2
Butchers use bandsaws, this is going to drive them crazy
.
.
.
.
.
.
.
.
.
.
.
(not serious)
-
23rd October 2009, 12:54 PM #3
The poor bloke in the video trying to cut his sausage in half was wondering why he couldn't cut it.
-
23rd October 2009, 02:11 PM #4.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
-
23rd October 2009, 06:54 PM #5
-
23rd October 2009, 08:18 PM #6.
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 5,215
-
23rd October 2009, 08:22 PM #7.
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 5,215
-
23rd October 2009, 10:05 PM #8
I wouldn't consider a bandsaw with a saw stop mechanism, because I don't see the risk (in respect to the possibility of cut fingers) as worth the additional cost
but you may recall that some time ago there was a poster asking where they could purchase a blade guard for a bandsaw – the blade guard they were after was to go between the upper thrust / guide bearings and the table surface effectively preventing any but deliberate contact with the blade
based on the experiences of woodworkers I've worked with at Tech over the past two years, it's not uncommon for people in noisey multi-person workshops to open the wheel guard doors while the blade is still moving — especially bigger saws which have a lot of momentum — which justifies the use of electrical cut outs and electric brakes (cut the power and the motor becomes a generator till the blade stops)
also all the B/Ss at Tech are fitted with a "clear" perspex guard over the upper bearing assembly. There's a narrow U-slot cut in the front of the guard so you can "see" the blade. In my opinion a B/S with this sort of guard is more dangerous than one without as you have to contort your body to see how close to the line you are cutting. It's been fitted at the insistance of NSW Workcover following one or more "accidents"regards from Alberta, Canada
ian
-
24th October 2009, 07:49 AM #9SENIOR MEMBER
- Join Date
- Oct 2008
- Location
- Gold Coast
- Age
- 49
- Posts
- 591
as a carpenter and woodworker i would buy this is in a heartbeat.
the reason i dont rush out to buy it asap as i am sure the reason most people wont, is because of cost.
but in the ideal world where my bank account had unlimited funds, just like the government, then of course i would buy this product.
i have also worked in worskhops with 50 - 60 other carpenters running about. in high traffic areas it is so simple to lose your concentration for a second or two.
this product and its brother the tablesaw will be commonplace in the future. but for now, only the people with unlimited funds, will be buying. and obviously government for schools.
just my 2 cents worth.
regards, justin.
-
24th October 2009, 09:25 PM #10
I can see work safety being the reason employers and education going for it on the grounds they took all possible measures to ensure a safe work environment. For us home woodies we will just have to take care until we can afford it.
-
24th October 2009, 09:35 PM #11.
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 5,215
I know for a fact schools in Victoria arnt interested as its to expensive, they do have a strict budget (not to say some haven’t purchased them) Prisons would love them, but how many prisons are their, that leaves professional woodworkers. What I would like to know is, how many cabinet shops use 10 (or 12) inch cabinet saws? The vast majority use Sliders. So until there is a saw stop slider, it will remain a minor player in the market place
-
25th October 2009, 09:47 AM #12SENIOR MEMBER
- Join Date
- Oct 2008
- Location
- Gold Coast
- Age
- 49
- Posts
- 591
you are right lignum.
i also reckon once sawstop introduce a sliding panel saw, that is when they will really be taken seriously by the woodworking industry.
most cabinet makers and kitchen manufacturers would scoff at buying the available product now.
hopefully this will bring down the overall prices and we all can enjoy the unique safety features of sawstops products.
regards, justin.
-
13th June 2012, 04:54 AM #13New Member
- Join Date
- Jun 2012
- Location
- MB, CAN
- Posts
- 3
I would love SawStop to make something for a Bandsaw
Recently I have been looking for a way to make the bandsaws on our plant floor safer. We've had a few people being careless lately and they've cut their fingers.
As soon as it happens we have to lock down the bandsaw, write out reports, and do all that fun stuff. The employer must figure out a way to make this "never happen again" which seems like an impossible task. It's a bandsaw...treat it like a bandsaw and you shouldn't have a problem right?
But sometimes that's not an option. We've recently contacted SawStop and they still haven't come out with the flesh sensor which is disappointing. I'm surprised...this thread started years ago!
We work mainly with plastic but we do have a woodworking shop that we also need to fit with some safety device. We cut up plastic scrap and rough cut thermoformed parts.
Does anybody know of any other device that can potentially make a bandsaw: finger cutting free?
A 12 hour shift for a younger worker can be draining...after 10 hours in a hot environment especially. If they would give a little bit more respect and care we wouldn't have to worry about this but...
One idea I thought of was putting a monitor in front of the machine scrolling through different bandsaw accidents
Any ideas?
-
13th June 2012, 03:16 PM #14Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
12 hours shift in a hot environment and you wonder that young workers get tired and then because they are tired a little careless. No wonder that they get careless.
Maybe as an employer you should first look at what you are making your employees do rather then blaming the workers.
Maybe more normal (shorter and with more breaks) shifts would solve your problem.
Peter.
-
13th June 2012, 03:51 PM #15
Whilst this is obviously an unfortunate story I fail to see the connection with the Saw Stop and its technology. I am sure that some will argue that he shouldn't have bothered with the Saw Stop technology on his saw as his jointer was still a dangerous bit of machinery, but that is like saying I will not drive in a car with airbags because I wear a helmet when riding my bike.Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.
Similar Threads
-
Sawstop upgrades
By jmk89 in forum TABLE SAWS & COMBINATIONSReplies: 4Last Post: 18th June 2008, 05:56 PM -
Sawstop
By mrbean in forum WOODWORK - GENERALReplies: 1Last Post: 15th November 2007, 12:22 AM -
www.sawstop.com
By Arry in forum HAND TOOLS - POWEREDReplies: 12Last Post: 30th July 2007, 09:44 PM -
SAWSTOP - Keep all your fingers
By monoman in forum WOODWORK - GENERALReplies: 77Last Post: 10th December 2004, 05:36 PM -
Sawstop
By Marty Lott in forum HAND TOOLS - POWEREDReplies: 4Last Post: 5th January 2001, 05:34 PM