Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
15th August 2016, 07:59 PM #1Senior Member
- Join Date
- Apr 2004
- Posts
- 383
Space Age Ceramics Bandsaw Guides - Anyone have experience with these?
Hi,
I came across this USA website: spaceageceramics.com which sells, via the Internet, a wide range of ceramic bandsaw guides for reasonable (compared to Felder and Laguna) prices in US $.
Has anyone on the forum had experience with these guides? If so, I'd like to hear from you especially if you bought replacement guides in the European style (in other words, Laguna, Felder, etc)
Thanks in advance
PaulNew Zealand
-
15th August 2016 07:59 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
-
16th August 2016, 04:07 PM #2China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
I have not had experience with ceramic guides although I have used ( extensively ) bandsaw with custom made carbide guides which would have a similar result and it was the most accurate bandsaw I have ever used, the blades seemed to last forever. The guides never needed replacing
-
16th August 2016, 11:10 PM #3
Can someone describe what to expect when ceramic guides replace the steel types? Are they more silent? Smoother (well, I expect that, along with less heat)? Does this show up on a cut?
Also, has anyone used these on a Hammer 4400, and which set to buy?
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
17th August 2016, 09:44 AM #4Member
- Join Date
- Jun 2012
- Location
- Diamond Creek, Vic
- Posts
- 84
I have replaced the roller guides on my Hammer N4400 as I didn't like the original roller guides. They were either too stiff or too loose. The part number for the upper guide is ST 423-035 and the lower guide is ST 423-036. I found the guides very good and very quiet if set correctly and I cannot fault the cuts. Very expensive though!
Similar Threads
-
bandsaw guides
By 520tis in forum BANDSAWSReplies: 2Last Post: 6th September 2014, 06:31 AM -
Bandsaw Guides...
By andrewwong in forum BANDSAWSReplies: 8Last Post: 9th November 2013, 01:42 PM -
bandsaw guides
By Ross arnold in forum BANDSAWSReplies: 2Last Post: 6th May 2012, 11:22 PM -
bandsaw guides
By John Balloch in forum BANDSAWSReplies: 5Last Post: 9th September 2010, 11:08 PM -
more on bandsaw guides
By mongrell in forum BANDSAWSReplies: 2Last Post: 23rd September 2006, 07:33 PM