Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
1st November 2021, 08:32 PM #1Member
- Join Date
- Mar 2012
- Location
- australia
- Posts
- 98
Thin kerf re saw blade in Perth WA
I have a Jet 14" bandsaw and the kerf on the current 1/2 inch re saw blade is about 2mm. I need a kerf of about 1mm or less for my current project.
Any suggestions for a supplier here in Perth?
-
1st November 2021 08:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st November 2021, 09:47 PM #2Senior Member
- Join Date
- Feb 2014
- Location
- Bne
- Posts
- 383
Sorry Harry, noone in Perth. I get mine made by CSK at Deception Bay, Qld. I use the bi metal blade. From memory they are Italian Steel.
-
8th November 2021, 01:24 PM #3SENIOR MEMBER
- Join Date
- Nov 2008
- Location
- Perth
- Posts
- 543
I do not know of any supplier in Perth. In the past I used the Wood Slicer from Highland Woodworking in the US. A top blade for cutting veneers. It does tend to go dull cutting WA's wood too quickly but fresh out of the box.......wonderful.
-
8th November 2021, 04:30 PM #4Senior Member
- Join Date
- Aug 2021
- Location
- Top End
- Age
- 48
- Posts
- 132
You could give Hughans in Osborne park a try if its not too late for your needs
Phone: (08) 9244 1977
Wood Cutting Bandsaw Blades - Hughans Saw Service
I purchased a TCT bandsaw blade off them - was a bit slow in early covid days but otherwise good service
Similar Threads
-
VICTORIA 10inch thin kerf saw blade 80 teeth 1/16 kerf
By jtools in forum WOODWORK - Tools & MachineryReplies: 0Last Post: 1st November 2020, 10:37 AM -
100 tooth vs thin kerf blade
By markdem in forum WOODWORK - GENERALReplies: 13Last Post: 11th May 2016, 11:57 PM -
Thin kerf blade
By Aerohydro in forum TABLE SAWS & COMBINATIONSReplies: 7Last Post: 30th August 2008, 05:43 PM -
Thin kerf resaw blade
By bloggs1968 in forum BANDSAWSReplies: 2Last Post: 14th March 2006, 06:15 AM