Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Thrust bearing guides
-
21st April 2009, 11:32 PM #1Member
- Join Date
- Mar 2009
- Location
- Margaret River
- Posts
- 65
Thrust bearing guides
Hi there everyone,
Need to get some non-toy like heavy duty (like I saw on a Meber SR 900) blade guides /thrust bearings for my Wadkin Bursgreen C-9.
It currently has a pissy little set up that looks totally inadequate for a large blade although when I bought it 2nd hand it had a 9.5 mm blade , which the 40-50mm dia standard bearings would probably have managed.
The " height of cut adjustment " shaft that the whole set up bolts to is 35mm dia which is the same as the SR 900. Rang Ron Mack in perth they said from Italy and $5-600 each and I need the bottom guide as well!!
Looking at American co. Carter Bandsaw guides on net.
Any suggestions or Australian sources??
-
21st April 2009 11:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd April 2009, 12:53 AM #2
Whatever your solution, make sure you get dust proof bearings otherwise they will quickly fill with dust and seize.
- Wood Borer
-
22nd April 2009, 09:55 PM #3Novice
- Join Date
- Apr 2008
- Location
- Canberra
- Posts
- 22
You can get the euro style guides from Felder NSW. I got the 600 size top and bottom set from them in 07 and from memory they had the larger ones as well.
At the time they were about $100 cheaper that I could find else where.
-
24th April 2009, 11:43 AM #4Member
- Join Date
- Mar 2009
- Location
- Margaret River
- Posts
- 65
Thanks , I`ll give em a try.
-
27th April 2009, 12:17 PM #5SENIOR MEMBER
- Join Date
- Feb 2004
- Location
- kuranda north qld
- Posts
- 717
have the meber saw guides and they were not sealed and needed oiling often .when the top set broke made up a set from iron with ball bearings for guides . have worked well for years . looked at carter guides , but expensive at the time . bottom guides still ok.. cheers bob
Similar Threads
-
lower bearing guides
By HaydnG in forum BANDSAWSReplies: 2Last Post: 16th April 2008, 04:38 PM -
Roller Bearing Guides - Newbie Question
By prokofiev_2000 in forum BANDSAWSReplies: 10Last Post: 2nd January 2008, 10:09 AM -
Thrust bearing question
By old_picker in forum BANDSAWSReplies: 4Last Post: 7th October 2006, 07:27 PM -
Roller Bearing Guides
By craigb in forum BANDSAWSReplies: 8Last Post: 24th July 2006, 08:42 AM -
Thrust bearing for BAS450
By CameronPotter in forum BANDSAWSReplies: 5Last Post: 27th November 2005, 07:10 PM