![Thanks](https://www.woodworkforums.com/dbtech/thanks/images/thanks.png)
![Likes](https://www.woodworkforums.com/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: Hamatu lathe
-
9th January 2018, 10:33 AM #1
New Member
- Join Date
- Jan 2018
- Location
- Australia
- Posts
- 1
Hamatu lathe
Hi all
Im new to the forum and This is my first post and im not sure if this is the right place to ask this question but ill give it ago.
I have recently brought a 1967 hamatu th-6'(410x800) metal lathe its 3 phase 5 hp motor it looks to be well built dose any one know much about these machines ? the trouble im having is the last owner had pulled it down cleaned and painted it and didnt get around to putting it back together so i put it back together and im having trouble with the wiring the last owner undid a hand full of wires out of the electric unit of the back of the lathe
And did not mark where they went these wires include (the spindel forward reverse stop. the micro switch that stops the lathe when foot brake is aplyed.the load indicating gauge.two switches and two indacation light unshaw of what these do . So my question is is there anyone out there with the same machine that that could take a picture of there machines wiring or could help me work out what wires go to what terminal that would be a great help and much appreciated there is next to nothing on the net about there machines no wiring digrame not even a workshop manual very frustrating ill try and put pictures up soon
Regards rick
-
9th January 2018 10:33 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th January 2018, 11:41 AM #2
Welcome to the forum.
I have moved your post to the Electronics sub-forum from where you had it originally. Your question is specific to the electrical connection with the lathe that you have acquired. This might not be entirely the correct location for your post but it is a general question concerning your lathe.
There is a sister site for metal workers, Metal Work Forums that you might want to also check out.
Please also note,
DISCLAIMER
No liability is accepted by UBeaut or the Wood Working Forum's administrators
or moderators for advice offered by members posting replies
or asking questions regarding electrical work.
We strongly advise contacting a Licensed Tradeperson for all electrical work.WARNING
Information supplied within posts is not to be considered as detailed formal instructions to complete a task.
Members following such information do so at their own risk
Similar Threads
-
Hamatu Lathe on Single Phase
By GuzziJohn in forum METALWORK FORUMReplies: 13Last Post: 18th April 2013, 09:24 AM -
Hamatu Lathe
By GSRocket in forum METALWORK FORUMReplies: 4Last Post: 17th November 2012, 10:40 AM -
Hamatu 20
By Nrbar in forum METALWORK FORUMReplies: 1Last Post: 17th October 2012, 10:34 PM -
Hamatu Lathe
By GuzziJohn in forum METALWORK FORUMReplies: 27Last Post: 24th June 2012, 12:45 PM