Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: 14" bandsaw
-
28th October 2013, 04:45 PM #1New Member
- Join Date
- Dec 2009
- Location
- Canberra
- Posts
- 1
14" bandsaw
I have bought a new bandsaw, and don't have room for two, so my venerable 30+year old Sheng Tsai Taiwanese built bandsaw is for sale. It is a standard Delta clone, as were popular at that time with cast iron main frame. The wheel tires were replaced about 10 years ago, so are probably getting close for another replacement. The motor is 2/3hp (I think) and it has always been happiest with a 1/4" blade. The table tilts, 45 deg in one direction and about 15 in the other. It is a basic bandsaw, and I am sure could be improved with a little appropriate fettling. The bits of political history on the top wheel cover come at no extra expense. $200 and you will need a trailer or a ute to take it away.bandsaw2.jpg
-
28th October 2013 04:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
WIP - Restoration of an 1960's (?) Toolmac 14"" Taiwanese Bandsaw
By GarciaJ in forum BANDSAWSReplies: 22Last Post: 22nd October 2012, 10:30 PM -
Bandsaw 350MM (14in) - "Rural" Brand
By RosscoPerth in forum WOODTURNING - GENERALReplies: 2Last Post: 30th April 2008, 01:02 AM