Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
6th January 2015, 11:07 AM #1Senior Member
- Join Date
- Dec 2010
- Location
- Caloundra, Sunshine Coast, Qld
- Posts
- 361
8 Quality Brand Wood Turning Chisels
This is what I have left of the HSS woodturning chisels I want to sell. Pick-up is from Caloundra (Sunshine Coast), or I may be able to meet you on the Northside of Brisbane to deliver these to you (please PM before assumming, if this is your preferred option). I am selling the chisels individually, but am happy to post (at buyer's expense anywhere within Australia) if you spend $50 or more on the chisels.
THIS IS NOT AN AUCTION.
Overall, the chisels are in good condition, but expect some surface rust and some chipping of the surface coating on the handles. All chisels come with original manufacturer made handles (except for the generic diamond Parting Tool). I think most chisels are close to full length.
It was impossible to put multiple photos of each chisel in this ad, but if you require close-ups of particular chisels, please PM me an email address or mobile phone number and I would be happy to send you photos.
I have priced chisels at approx 50% (or less) of their new price.
Robert Sorby:
3/8 Square Bedan Tool - $34
Henry Taylor:
3/4 inch Continental Gouge - $42
1/2 inch Standard Skew Chisel - $28
Fluted Parting Tool - $54
Hamlet:
1/4 inch Spindle Gouge - $20
P&N:
24mm x 8mm Skew Chisel - $47 (has no surface finish on handle)
Coronet (English Made):
1 1/4 inch Roughing Gouge - $70
Unbranded Diamond Shaped HSS Skew Chisel - $10 (badly made, home-made handle!)
-
6th January 2015 11:07 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th January 2015, 11:51 PM #2Senior Member
- Join Date
- Dec 2010
- Location
- Caloundra, Sunshine Coast, Qld
- Posts
- 361
Price Drop
I have reduced the price of these last 8 chisels to move them on. Revised prices below:
Robert Sorby:
3/8 inch Square Bedan Tool - $30
Henry Taylor:
3/4 inch Continental Gouge - $40
1/2 inch Standard Skew Chisel - $22
Fluted Parting Tool - $38
Hamlet:
1/4 inch Spindle Gouge - $18
P&N:
24mm x 8mm Skew Chisel - $36 (has no surface finish on handle)
Coronet (English Made):
1 1/4 inch Roughing Gouge - $60
Unbranded Diamond Shaped HSS Skew Chisel - $8 (badly made, home-made handle!)
-
15th January 2015, 08:47 PM #3Senior Member
- Join Date
- Dec 2010
- Location
- Caloundra, Sunshine Coast, Qld
- Posts
- 361
Listing closed
Listing closed due to lack of interest in the last of these chisels.
Similar Threads
-
GOOD quality carving and turning chisels?
By Chikoroll in forum HAND TOOLS - UNPOWEREDReplies: 14Last Post: 28th June 2008, 01:23 AM -
What brand of turning chisels ? Poll!!
By Zed in forum POLLSReplies: 4Last Post: 2nd August 2003, 04:39 PM