Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Benchtop Chisel Mortiser
-
3rd May 2015, 12:37 PM #1
Benchtop Chisel Mortiser
Never been used please read on :
Carba-Tec Benchtop Chisel Mortiser
This benchtop mortiser provides the huge benefit of lateral (side to side Y-axis) and longitudinal (front to back X axis) table adjustment.
You can now move your workpiece accurately in small increments rather than moving it by hand and having to jig and shim the material to fit it into correct drilling position. Both the table and the motor head travel on dovetail shaped guides.
Adjustable jib strips are fitted to ensure years of accurate use. A gas strut provides counterbalance to the weight of the head and motor. Stops are provided for both vertical and horizontal movements for repeat work. Supplied with one 3/8" chisel.May your saw stay sharp and your nails never bend
-
3rd May 2015 12:37 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th May 2015, 08:33 PM #2
Starting bid?
This is always tricky, I don't want to be insulting but I do love a bargain ... where do we start???
peteShine on you crazy diamond!
Similar Threads
-
Question re The Carbatec Benchtop Chisel Mortiser
By RoyG in forum GENERAL & SMALL MACHINERYReplies: 5Last Post: 1st May 2015, 11:27 PM -
benchtop chisel morticer/mortiser
By damian in forum GENERAL & SMALL MACHINERYReplies: 5Last Post: 21st June 2011, 04:00 PM