Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Carba-Tec Tennoning Jig
-
1st September 2013, 02:07 AM #1SENIOR MEMBER
- Join Date
- May 2002
- Location
- Queenslander
- Posts
- 206
Carba-Tec Tennoning Jig
Carba-Tec Tenoning Jig
Provides an easy means of cutting tenons and is particularly efficient for repetitive work following initial set-up, which is achieved with multi-position control levers. The stock is clamped to the face of the jig using a large crank handle.
The jig will fit most table saws with a 3/8” x 3/4” mitre groove and has a capacity for stock up to 3-¼” thickness. Set screws provide the user with the ability to achieve face alignment with the blade, thereby ensuring parallel tenon faces. Set screws in the mitre bar provide the capability to ensure that the jig travels accurately and smoothly in the mitre slot.
The jig also features a 0 to 45° back stop for cutting angled tenons.
Tenon Jig-1.jpgTenon Jig-2.jpgMal
-
1st September 2013 02:07 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st September 2013, 07:35 PM #2SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 742
Location
Can you please advise where this item is to be collected from if bought from you? Thank you
-
1st September 2013, 09:06 PM #3SENIOR MEMBER
- Join Date
- May 2002
- Location
- Queenslander
- Posts
- 206
-
1st September 2013, 09:14 PM #4GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 2,746
Will you post to Victoria?
-
1st September 2013, 09:40 PM #5SENIOR MEMBER
- Join Date
- May 2002
- Location
- Queenslander
- Posts
- 206
Shipping
Hi Cava,
I'm happy to pack and post anywhere in Australia at buyers expense. The item is a heavy little sod and weighs in at just under 9 kg excluding packaging. Estimated postage to Melbourne is $25 parcel post and $70 express post. You would need to allow for insurance if that was your wish!Mal
-
1st September 2013, 11:36 PM #6GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 2,746
-
2nd September 2013, 09:17 AM #7SENIOR MEMBER
- Join Date
- May 2002
- Location
- Queenslander
- Posts
- 206
Tennoning Jig
No problems Cava,
I appreciate your interest.Mal
Similar Threads
-
Carba-Tec
By Black Bear in forum HAVE YOUR SAYReplies: 39Last Post: 14th December 2010, 10:56 AM -
Carba-Tec
By pjae in forum TABLE SAWS & COMBINATIONSReplies: 6Last Post: 18th April 2010, 12:21 PM -
Dowel joining vs Mortise and tennoning
By gilbo in forum WOODWORK - GENERALReplies: 9Last Post: 17th April 2007, 09:23 AM -
Carba-tec Vic
By Gumby in forum ANNOUNCEMENTSReplies: 7Last Post: 10th October 2006, 06:25 PM