Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
28th November 2013, 07:01 PM #1
Dovetailed Mini Coffin Smoother Kit
Two years ago I played around with making a Dovetailed Mini Coffin Smoother. As I am now turning my attention away from tools I am clearing them out.
I had the sides and sole laser cut from O1. I had four kits made for me, I made one smoother for myself. I partially finished one as a gift for a friend and I now have two kits that I have no need for. This kit is just the sides, a sole and a bedding block beveled at 55 degrees.
The assembly of the kit is up to you. However the hard work of cutting out the pieces and get the material has been done for you.
NOTE: This kit has a defect one of the on front dovetails on the sole which is wider then it needs to be you will need to fill it with some solder.
Below is a photo of the infill I made for a friend. It will give you an idea of what you can get from the kit.
I prefer to avoid paypal for the fees it imposes, PM me and I will give you the bank details. Postage or pick up from Coburg can be worked out .
IMG_3446.jpgIMG_3448.jpgIMG_3451.jpgIMG_3453.jpgIMG_3452.jpg
-
28th November 2013 07:01 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th November 2013, 11:10 AM #2Member
- Join Date
- Feb 2012
- Location
- Brisbane
- Posts
- 93
Hi, do you have a blade that would go with the kit?
-
29th November 2013, 11:18 AM #3
-
29th November 2013, 03:09 PM #4
Both kits have been sold.
Similar Threads
-
Coffin Smoother - Refurbish or Replace?
By PopeFalcon in forum HAND TOOLS - UNPOWEREDReplies: 10Last Post: 12th January 2013, 01:52 PM -
Coffin Smoother
By RayG in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 72Last Post: 9th November 2008, 07:22 AM -
building a coffin smoother?
By zac_in_ak in forum HAND TOOLS - UNPOWEREDReplies: 12Last Post: 17th September 2008, 04:17 PM -
Pope's dovetailed coffin article
By scooter in forum WOODWORK - GENERALReplies: 57Last Post: 13th December 2005, 09:27 AM