Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Huon Pine
-
19th September 2013, 11:23 AM #1New Member
- Join Date
- May 2013
- Location
- South-east Queensland
- Posts
- 9
Huon Pine
Approx .6 of a cubic metre (minimum). The majority is slabs....1500x650x55, 1500x500x55, 1300x500x100, 100x600x50. There are 7 slabs total. In addition there is 100x100's up to 1300 in length, plus various other sizes. This is very good hand-picked huon pine, including some bird's eye. Has been air-dried in excess of 15 years.
Also available is Australian White Beech, Australian Red Cedar, New Guinea Rosewood, New Guinea Wau beech and New Guinea Kwila...in excess of cubic metre available for most species. The majority of the timber was originally purchased for the construction of a large sailing vessel.
If any interest do not hesitate to contact me.
Pick up from Hinterland of the Gold Coast.
Regards
Alan
-
19th September 2013 11:23 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th September 2013, 11:50 AM #2New Member
- Join Date
- Sep 2013
- Location
- Australie
- Posts
- 1
pictures?
Any picture of these? Thank you.
-
19th September 2013, 12:54 PM #3New Member
- Join Date
- May 2013
- Location
- South-east Queensland
- Posts
- 9
Huon Pine
My camera is shot at the moment until a have a chance to have it fixed. I have taken some photos on my phone. Leave your phone number and I will send them through. My phone number is 0427 349 501. My email is [email protected].
Cheers
Alan
Similar Threads
-
huon pine
By nine fingers in forum FINISHINGReplies: 10Last Post: 18th February 2010, 03:16 PM -
Huon Pine - $? / m3?
By Woody60 in forum TIMBERReplies: 3Last Post: 24th June 2009, 07:37 PM -
Huon Pine
By Penpal in forum WOODTURNING - PEN TURNINGReplies: 16Last Post: 4th June 2009, 02:13 AM -
huon pine
By robyn2839 in forum TIMBERReplies: 14Last Post: 8th November 2007, 08:28 PM -
Huon Pine
By ptygmit in forum FINISHINGReplies: 8Last Post: 5th March 2007, 08:00 AM