Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
13th January 2014, 05:54 PM #1Senior Member
- Join Date
- Jun 2012
- Location
- Brisbane, Australia
- Posts
- 142
Jet Tilt Chisel Mortiser - Brand New.
Brand new. JET 719AS chisel mortiser.
I bought this but decided to get a Domino as it will suit my purposes a bit better.
I have unpackaged and assembled it and used it literally twice. Once as a test, and then 8x mortises - That's it!
Inspections are welcome.
This cost $1600 new + 2 bits. If you were thinking about buying this model from Carbatec, then do yourself a favour and save some money.
Jet Tilt Mortiser 719AS : CARBA-TEC
Motor: 750w, 230v, 10A
Chisel RPM: 1450rpm
Drill Chuck Capacity: 13mm
Max. Chisel Size: 25.4mm
Centre of chisel to fence: 101.6mm
Chisel shank size: 5/8”, 3/4", 13/16"
Chisel Stroke: 200mm
Screen Shot 2014-01-13 at 4.50.53 pm.jpg
-
13th January 2014 05:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Pinnacle Table Saw - 10" - 2000w - 35 tilt - $300 brand New - Anybody got one ?
By steamingbill in forum TABLE SAWS & COMBINATIONSReplies: 2Last Post: 19th May 2013, 11:10 PM -
Chisel mortiser
By greggyboy in forum GENERAL & SMALL MACHINERYReplies: 4Last Post: 19th September 2011, 01:37 PM -
Chisel Mortiser
By Dave C in forum GENERAL & SMALL MACHINERYReplies: 5Last Post: 25th July 2008, 11:10 PM -
Chisel Mortiser
By Peter Doobes in forum WOODWORK - GENERALReplies: 3Last Post: 5th January 2004, 08:44 PM