Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
Thread: wanted small qctp tool holders
-
26th November 2013, 07:53 AM #1GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
wanted small qctp tool holders
hi i have a dickson type m tool post i would like some more holders.
the holders are small 70mm long 30mm wide.
SAM_0888.jpgSAM_0890.jpg
i also have a small 40 position tool post that id like some tool holders for.
there 80mm long and 40mm wide.
SAM_0891.jpgSAM_0892.jpg
i also have some odd larger qctp tool holders that id be happy to swap for.
aaron
-
26th November 2013 07:53 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th November 2013, 08:58 AM #2
I don't have any small holders to swap but I may be interested in the larger ones if they would fit the dixon on the colchester.
…..Live a Quiet Life & Work with your Hands
-
26th November 2013, 09:11 AM #3GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
tool holders
hi mate ill measure them shortly
-
26th November 2013, 09:14 AM #4
-
26th November 2013, 12:20 PM #5GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
tool posts
the other spare tool holders i have are
25mm tool 108mm long
92mm between the vees
60mm high
32mm tool slot
10mm between vees
66mm high
aaron
-
26th November 2013, 03:06 PM #6
-
26th November 2013, 08:07 PM #7SENIOR MEMBER
- Join Date
- Aug 2011
- Location
- victoria
- Posts
- 524
-
26th November 2013, 10:18 PM #8GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
40 position tool post
hi peter how are you. that could be a plan.
it may be to small for my lathe but im not
yet shore.
it has two holders.
aaron
-
26th November 2013, 10:50 PM #9
What is the benefit of a 40 position holder if you can rotate the whole tool post around the bolt???
…..Live a Quiet Life & Work with your Hands
-
26th November 2013, 10:59 PM #10GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
-
26th November 2013, 11:03 PM #11SENIOR MEMBER
- Join Date
- Aug 2011
- Location
- victoria
- Posts
- 524
-
1st December 2013, 11:22 PM #12
Nether look to be a match for my Dixon unfortunately.
…..Live a Quiet Life & Work with your Hands
-
2nd December 2013, 08:10 PM #13GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
my mistake.
the small post is a rapid not dickson.
aaron
Similar Threads
-
Making BXA QCTP holders
By Ueee in forum METALWORK FORUMReplies: 16Last Post: 25th June 2013, 10:16 AM -
Multifix QCTP B series tool holders
By argeng in forum METALWORK FORUMReplies: 7Last Post: 16th August 2012, 09:37 AM -
Plans wanted for Carbide Tip inserts tool holders
By Jors in forum METALWORK FORUMReplies: 11Last Post: 13th November 2010, 11:12 PM -
Machining QCTP holders
By Sterob in forum METALWORK FORUMReplies: 4Last Post: 27th June 2010, 01:57 PM