Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Vicmarc VL100 Mini lathe
-
6th June 2014, 09:54 PM #1SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 742
Vicmarc VL100 Mini lathe
I have for sale an old Vicmarc VL100 Mini Lathe. It comes with just the basic accessories (drive centre, live centre, knock-out bar, small face plate chuck, and 2 different sized tool rests). The lathe and motor are mounted on a board so it can be used on a workbench or saw horses and then put on a shelf or under a workbench when not in use (for those woodworkers who have a small workshop). The motor is the original Italian 0.5HP Lafert 240v motor that drives a 6 step cone pulley connected to a matching pulley (on the lathe spindle) via a tripe V belt. The lathe is in good working order but cosmetically, the lathe and motor have staining from the application of surface finishes, the paintwork is chipped in a few places and there is the odd small bit of surface rust - but not on the machined metal surfaces.
This is not an auction. The buy-it-now price is $370.
Collection is from Aspley in Brisbane.
Please post "I'll take it" if you would like to buy it. Thank you.
-
6th June 2014 09:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th June 2014, 11:59 PM #2SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 742
Price drop to $340
I have now reduced the price of the lathe to $340.
-
13th June 2014, 04:55 AM #3
Does it have a 24 pin index? I could be tempted if it does.
-
13th June 2014, 08:45 AM #4
What spindle thread, if M30x3.5 then I could be interested, after Mobyturns of course.
-
13th June 2014, 08:11 PM #5SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 742
VL 100 details
Mobyturns, the lathe does have the 24 pin index.
Big Shed, the spindle thread looks to be 1 inch.
-
13th June 2014, 08:46 PM #6
-
13th June 2014, 09:35 PM #7SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 742
VL 100
No worries, Big Shed. Thanks.
-
14th June 2014, 08:27 AM #8
Woodchopper, I have sent you a PM to see if we can arrange transport options.
-
14th June 2014, 09:34 AM #9
I will take it
Woodchopper,
I will take it at the $340 as it looks like transport is all OK.Last edited by Mobyturns; 14th June 2014 at 09:35 AM. Reason: add title
-
14th June 2014, 09:38 PM #10SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 742
Sold
Thanks Mobyturns. I will leave this thread open to allow you to hit the Paypal button at the top of this thread.
Similar Threads
-
Mobile Vicmarc VL100
By Allen Neighbors in forum WOODTURNING - GENERALReplies: 11Last Post: 3rd February 2010, 02:06 AM -
Vicmarc VL100
By Slyffer in forum WOODTURNING - PEN TURNINGReplies: 15Last Post: 3rd May 2008, 04:31 AM