Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Cutting saw plate to size.
-
13th December 2013, 03:53 PM #1Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,357
Cutting saw plate to size.
Hi. A while ago I purchased this type of hand metal shear to trial it with cutting saw plate. 8" 200mm Manaul Steel Metal Plate BAR Hand Shears Shear | eBay
Today I got around to finally setting it up and trialing it on some scrap 0.020 & 0.025 saw plate. Little effort was required to assembly the shears with only the pull down bar requiring bolting on. The quality of the shears seemed very good for the price paid, with a very tight clearance evident between the fixed and moving cutting jaw. How did it go. !!!
Well it worked extremely well, with minimal effort required to slice through the saw plates. The cut edges remained flat with no signs of roll over. the only sign to the freshly cut edges was a very light raised burr on the top surface of the cut edge, which would require little effort to remove.
Here's some pics.
Stewie;
-
13th December 2013 03:53 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th December 2013, 06:25 PM #2
I was actually wondering about how you were going with the shear yesterday…Looks like it is a good option for cutting. Are you going to set up some sort of fence so you can feed in at 90deg?
…..Live a Quiet Life & Work with your Hands
-
17th January 2014, 06:26 AM #3
A bit of talk from Woodnet on cut plate ...
WoodNet Forums: Hand Saw making conundrum
-
2nd February 2014, 06:34 AM #4
Hi Paul,
On the strength of the comments about the Beverly shear I decided to try one. It is great. Cuts 1095 like it is paper. Thanks for the suggestion.
Cheers,
Rob
the beverly shear.jpg
beverly shear at the start.jpg
Beverly shear at midway.jpg
It does leave a slight curl on the edge of the cut so I dressed it with a few file strokes and all of the curl was removed.
dress the edge of the plate.jpg
Similar Threads
-
cutting thick plate (50mm) with oxy
By .RC. in forum WELDINGReplies: 5Last Post: 23rd December 2011, 07:48 PM -
Diamond plate not cutting
By Tiger in forum SHARPENINGReplies: 12Last Post: 8th November 2011, 12:12 AM -
Cutting Laminex to size
By andyd in forum WOODWORK - GENERALReplies: 14Last Post: 31st August 2010, 08:23 AM -
Router plate-What is the best size
By Strungout in forum ROUTING FORUMReplies: 2Last Post: 10th November 2009, 05:45 PM -
Cutting Aluminium Plate
By zuffen in forum METALWORK FORUMReplies: 12Last Post: 6th June 2009, 11:27 PM