Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 20
Thread: A happy little family...
-
3rd April 2015, 09:54 PM #1
A happy little family...
It's been a very long time since I did any serious sawmaking, for a number of reasons, but over the last couple of weeks, I've been working away on a set of saws for someone, and am fairly pleased with the result. The set includes two tenon saws (a 14" 10 tpi & a 12" 12 tpi), plus a dovetailer (9.5" 15 tpi) and a carcase saw (12" 12tpi).
The two tenons & the dovetail (all ripsaws) are handled in Tiger Myrtle: Family pic r.jpg
The carcase saw is a crosscut, and partly to make it easy to see which is which on the bench, its handle is Flame (Hairy) oak: 12 inch tenon & carcase r.jpg
Each handle is different in its detailing, but also hang-angles have been tailored to suit the main purpose of each saw. For comparison, here are the two 12 inch saws - the tenon saw has a more upright hang to make it suitable for using 200-300mm above bench height; the carcase saw grip angle is lifted, to make it more comfortable when used at bench level: Handles cf.jpg
The Tiger Myrtle has come up rather splendidly, but what a pita it is to get it in a fit state to finish! The wood has a subtle fiddleback figure as well as the 'tiger striping', but that didn't cause much of a problem, it was the sanding scratches! This wood shows every scratch of every grain on a piece of sandpaper, and they are unusually difficult to remove with the following grade. I learned as I went along, & the best way I found was to use a finely-burred small scraper, lightly, after each grade of paper to remove stubborn scratches. That got me to the surface I like to have the quickest. By comparison, the Flame Oak took less than half the time to finish, after initial shaping.
Cheers,IW
-
3rd April 2015 09:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
3rd April 2015, 10:16 PM #2Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,357
Very nice work Ian.
The new owner is in for a real treat.
Why do you talk so unkindly about my favorite handle wood, Tiger Myrtle.
regards Stewie;
-
4th April 2015, 12:02 AM #3Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Gorgeous work Ian. A credit and a testament to your skills!!
bravabravabrava
-
4th April 2015, 02:34 AM #4
Great saws Ian.
Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
4th April 2015, 09:57 AM #5
Now I did say it was gorgeous stuff, Stewie.
I have no bones to pick about its looks, and it is an easy wood to cut & rough-shape. But you must admit, it's not the easist wood to put a blemish-free surface on! It's not the worst I've met, though, that honour goes to some Tulip oak (Argyrodendron), I got hold of a couple of years ago. The scratches are even harder to eliminate, & what's worse, I can't see most of them until I apply finish. But like the Myrtle, it looks pretty good when you finally beat it into submission.
Some of the woods I like to work with take considerably more effort to cut & shape, but are much easier to sand & polish up, so it's swings & roundabouts, as always.....
Cheers,IW
-
4th April 2015, 11:03 AM #6Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,357
Hi Ian. What I can say is that highly figured Tiger Myrtle at a thickness suitable for saw handles has become very expensive to purchase nowadays.
Stewie;
-
4th April 2015, 12:28 PM #7Member
- Join Date
- Apr 2009
- Location
- brisbane, australia
- Age
- 58
- Posts
- 87
Ian,
these are fabulous saws. I must say, the photos of these finished saws are terrific. I have to say it was a real pleasure to see these saws in "the flesh" so to speak. The way the handles sit in your hand, the weight and balance of each saw....something i still remember. Beautiful work.
-
4th April 2015, 07:43 PM #8
While I was in sawmaking mode, I decided to make myself a new carcase saw. For some time, I've been thinking I could do with a 12" 10tpi saw to supplement the 10" 12tpi saw which is my go-to cross-cutting saw for regular joinery. It's good for cutting small to medium tenon shoulders & so forth, but gets a bit bogged down on stuff wider than 3". I reckoned a slightly longer saw, with larger fangs would be the go, so knocked this one up. The handle is my favourite handle wood, Forest She-oak (Allocasaurina torulosa): carcase S-oak 10tpi.jpg
It will take me some time to see how useful it's going to be, but I like its action, from the trial cuts I made. I used 20 thou plate, which is on the thin side for a saw of this size, so I'll be interested to see how that goes, too.
With the saw I made because of a stuff-up, that's it for sawmaking for me, for a while, I have several other projects that I have to concentrate on over the next few months!
Cheers,IW
-
7th April 2015, 10:06 PM #9
Nice work once again Ian .
God I'm jealous of all the time you guys seem to get in the workshop .
I need to try this retirement career it looks like fun .
I really like the lambs tongue your done there
looks like it's all most pushing the saw along .
-
7th April 2015, 10:58 PM #10
More stunning stuff from the master, God I love looking at your work Ian.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
8th April 2015, 09:07 AM #11
Now you mention it, it does look a bit like that, doesn't it? I didn't consciously set out to make it look that way, I shaped the bottom & top where it meets the cheeks, to make it look thinner than it is, & it just flowed like that.....
Yeah, well, you'll get to my age soon enough, & Mr. Hockey et al might let you retire, but don't count on it.
Cheers,IW
-
8th April 2015, 10:58 AM #12
Spectacular looking saws!
Well doneregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
8th April 2015, 11:22 AM #13Member
- Join Date
- Nov 2013
- Location
- US
- Posts
- 96
Nice little family you have there, Ian.
-
10th April 2015, 05:32 PM #14
Ian
Just a wonderful group of saws. As soon as the owner emerges from the depths of his/her shed (not likely to happen in the immediate future) we will know who it is by the fixed grin etched on the face .
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
10th April 2015, 06:44 PM #15Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,357
My guess would be Luke Maddux.
Similar Threads
-
All In The Family?
By Sheets in forum JAPANESE HAND TOOLSReplies: 4Last Post: 11th February 2011, 01:23 PM -
family going to Oz
By Rifleman1776 in forum Hatches, Matches & Dispatches. Birthday greetings and other Touchie-feelie stuff.Replies: 19Last Post: 14th September 2010, 12:16 AM -
Family. What would we do without them?
By fenderbelly in forum WOODIES JOKESReplies: 2Last Post: 11th October 2007, 12:39 AM -
Happy Hippo Family puzzle
By Buzza in forum WOODWORK PICSReplies: 6Last Post: 21st June 2006, 10:12 AM -
Family Law
By Iain in forum WOODIES JOKESReplies: 0Last Post: 1st February 2005, 08:19 AM