Needs Pictures: 0
Results 1 to 15 of 17
Thread: A little challenger,in Jarrah.
-
30th September 2021, 05:20 PM #1
A little challenger,in Jarrah.
Another Saw done,the little challenger.
This was a challenge from the beginning the,back was the longest fold I’ve attempted so far started with a piece of 50mm/2.5mm piece of mild steel,the finished length is 235 mm, but i always start with a bit longer than that,as its nice to be able to trim the ends and remove any marks from the folding process.
Next i decide that i would like a little be of flourish,is that the right word,so out came the paper for some trials in paper,before engineers blue was applied an area to be cut out was removed,creating the bull nose on this that was fun.
But I’m quite happy with our it turned out.
The handle is Jarrah and open handle design(most will probably guess that [emoji6])
Another first for using Jarrah,and I’m quite impressed with Jarrah it cuts nicely an holds details on the edge very crisply.
An for something different I’ve used two knive makers bolts(6 mm Head)also know has Corby bolts fitted flush instead of the more traditional saw handle bolts.
The finish for the handle was shown hear so I won’t bore you with that.
It’s all gone too Poo
https://r.tapatalk.com/shareLink/top...ink_source=app
Specs
Saw plate is 247 mm long,50 mm to under the back,.5mm thick
Filed cross cut 12 TPI with 20 degrees of fleam an 12 degrees of rake i need to take out some cows an calf’s as Mr Ian would scolded me,so no pics of my sharping today.
But it’s cutting not to bad at present.
As a hang angle of 35 degrees.
Cheers Matt.
-
30th September 2021 05:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th September 2021, 06:18 PM #2
Very pretty Matt; especially the central flourish... or "weak spot" as a less careful sawyer could discover!
(It must have a reasonable amount of strength to be able to have been fitted so take the previous remark with tongue in cheek!)Nothing succeeds like a budgie without a beak.
-
30th September 2021, 06:28 PM #3
Chief, please don’t take this personally, but I knew someone would point out the lack of metal in the back there, trust me you would have to be Blind,hand fisted App who’s drunk an stupid to make the back bend we’re the Flourish is.
But you are right they live amongst us[emoji6].
Cheers Matt.
-
30th September 2021, 08:02 PM #4
That is an awesome looking saw! One day I have to give that a go too.
Well done and let us know how these knife handle bolts hold up.
Sent from my SM-G781B using Tapatalk
-
30th September 2021, 08:16 PM #5
-
1st October 2021, 09:07 AM #6GOLD MEMBER
- Join Date
- Oct 2018
- Location
- Dandenong Ranges
- Posts
- 1,892
Just lovely Matt. I know it caused you some stress but the handle looks stunning. Did you re purpose existing saw plate or start with brand new stuff?
-
1st October 2021, 09:31 AM #7
Hi Ma,
No I used some 1095 spring steel, that I got from Amazon.
It’s sold as shim stock, but is still 1095 high carbon steel.
1095 Spring Steel Sheet, Blue Temper, AMS 5122/SAE 1095/AISI 1095/AISI 1095, 0.002" Thick, 3" Width, 50" Length https://www.amazon.com/dp/B00065V03A...N5APM26YTCGN92
Not sure if that’s the one I actually brought but it may get you started.
Cheers Matt.
-
7th November 2021, 08:18 PM #8
Hey Matt.
Awesome looking saw and that handle. Did you use a template like available on I think Blackburn tools and then cut it by hand? And sanding?
Fantastic work here love how it's come up, my workshops shutdown due to moving house, I start cutting some new handles in Jarrah but haven't finished them yet.
Won't be for a while longer so I enjoy reading posts like these. Great work!
Cheers
Nathan
Sent from my Nokia 3.4 using Tapatalk
-
8th November 2021, 08:32 AM #9
Hi Nathan,
Yes I think with this one I used a Template from Blackburn tools.
A template is good to use but you can also just trace a handle from an original saw if you have one.
I generally use a small Band saw an small saws to cut away the bulk of the waste when shaping a handle, followed up by using a collection of rasps.
Then a A LOT of hand sanding.
Hope that helps.
Cheers Matt
-
8th November 2021, 01:26 PM #10
Hey, yeah thanks that lines up with what i was thinking might be your approach, ive only just picked up a bandsaw prior to my workshop shutting down/moving house so havent had the chance to use it for this yet. Also recently picked up the a bow sander from leevalley to i hope help with this hand sanding part after the rasp or file.
Looking good either way!
-
8th November 2021, 02:58 PM #11
I'm constantly amazed at what the dudes on this forum pump out.
I obviously know how its "done", but there is such a big difference between knowing and doing. The effort is real and the task time consuming.
This is an excellent saw.
-
8th November 2021, 03:01 PM #12
-
8th November 2021, 04:15 PM #13
-
8th November 2021, 08:01 PM #14
Agreed. I've got two handles on the go one Jarrah one NG rosewood that have taken a while to get to the shape I'm happy with, had to get a new rasp and bow sander to help but then moved so will be a while Q2 22 before I can pick this up again.
I definitely appreciate the WIP posts on this forum
Sent from my Nokia 3.4 using Tapatalk
-
8th November 2021, 08:03 PM #15
The bow sander is a good idea.
Similar Threads
-
Disston Challenger
By schuld66 in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 30th July 2015, 07:39 AM -
Mitsubishi Challenger
By Rodt68 in forum MOTOR VEHICLESReplies: 6Last Post: 23rd April 2012, 01:46 AM -
Jarrah Burl platters and a Jarrah Bowl
By Willy Nelson in forum WOODTURNING - GENERALReplies: 10Last Post: 17th September 2009, 06:55 PM -
Challenger 800 Wood Lathe
By AJTP in forum WOODTURNING - GENERALReplies: 4Last Post: 17th January 2008, 09:30 PM -
Jarrah Coffee Table, Jarrah Burl Bowl and other wood pics
By leighd in forum WOODWORK PICSReplies: 10Last Post: 17th June 2004, 10:08 AM