Results 1 to 6 of 6
  1. #1
    Join Date
    Nov 2012
    Location
    SE Melb
    Age
    64
    Posts
    1,277

    Default How to turn and fit a chisel handle

    My wife gave me a chisel she picked up from a rubbish bin when she saw a guy throwing it out.
    chisel.jpg

    I am a complete novice when it comes to turning a handle and fitting it to a chisel. So I found two videos from Paul Sellers
    Turning a handle:

    Fitting a chisel to the handle:


    Any sage comments and advice?

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2004
    Location
    Towradgi
    Posts
    4,835

    Default

    Drill the hole when the blank is square, turn round, fit the ferrule(s) and then turn the rest of the handle.

    Do not sharpen the chisel until you have the new handle on, DAMIKT!
    Pat
    Work is a necessary evil to be avoided. Mark Twain

  4. #3
    Join Date
    Apr 2001
    Location
    Perth
    Posts
    10,810

    Default

    Rob Cosman does a nice one here:



    Regards from Perth

    Derek
    Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.

  5. #4
    Join Date
    Dec 2007
    Location
    Sydney
    Posts
    2,205

    Default

    Ferrule can usually sit on the tailstock centre.
    Saves moving centre in and out whilst fitting.
    Do not use spring calipers, slip joint are safer.
    H.
    Jimcracks for the rich and/or wealthy. (aka GKB '88)

  6. #5
    Join Date
    Feb 2007
    Location
    blue mountains
    Posts
    4,882

    Default

    I usually dont find any issue with how Mr Sellers does things but why not drill out the hole first. Either like Pat said or drill on the lathe. Much easier than messing about with a shaped and finished handle. Apart for the drilling the rest of the process is good for a tanged chisel. Another tip is reuse the ferrule as it is the right size for that chisel and it will polish up like new on the lathe.
    Regards
    John

  7. #6
    Join Date
    Mar 2010
    Location
    US
    Posts
    3,076

    Default

    several years later now, but I fit handles often. But I fit handles having fit hundreds, so I'm not going to say my method is what beginners do. To address the hole issue, most people who haven't made handles will probably have limited turning options and having a drive that fits in a hole of enough size for the bit to be rigid isn't a gimme.

    I fit the handles by turning the stock round, then profiling the handle near to size, then adding the ferrule which is a friction fit (important to get right if you want clean work) and cutting the ferrule off (think long tube of brass) flush with the handle. The brass ferrule is marked off of the tenon made for it before press fitting the handle in.

    that leaves a slightly ragged edge on the ferrule to be turned off later.

    Finish turning handle with ferrule fitted and then I drill the finished handle by allowing the handle to rotate in my hand as the holes are being drilled. One long hole narrow for the tang on my chisels (I'm making the chisels) and one almost the size of the tang - just undersized for an inch or fraction of an inch.

    As the handle rotates in my hand if it is not rotating true. I will stop for a second and lever the bit. This eliminates issues of bits wandering and feeling helpless.

    the chisel goes into a vise with aluminum soft jaws (generally finished and already sharp by then) and the handle is rotated around the tang until it can be tapped into place. you never know how the opening will create irregularities in straightness, so the last position or adjustment is made at this point so everything is straight to the eye, and then the assembly is tapped on and then struck with a hard hammer to drive the chisel the rest of the way in - edge buried in sacrificial very hard wood if needed.

    Everything from turning to fitting and making sure everything is visually straight is only about 20 minutes with woods that are intolerant of rushing turning.

    I would guess a "foolproof process" for a lot of folks will lead to handles that aren't straight and head scratching later. If getting handles straight is too hard, getting a slightly loose handle fit and then seating in epoxy is perfectly fine. Nothing in handles is really permanent - if you saw or sand or split the handle off, if epoxy remains behind, it's not like you can't sand/grind or trim it off.

    I've messed up something like 3 out of the last 200 handles with the process mentioned above. before that in trying to figure out how to take "me" out of the process, I had a couple of handles fail or fly at some point in the process. Long drillbit on the lathe resulted in at least one flying that I can remember.

Similar Threads

  1. turn off or turn down speed
    By Woiim in forum WOODTURNING - GENERAL
    Replies: 12
    Last Post: 22nd March 2018, 10:53 PM
  2. Full chisel or semi chisel chain ?
    By auscab in forum SMALL TIMBER MILLING
    Replies: 3
    Last Post: 15th February 2017, 03:06 PM
  3. And so it begins: Turn, turn, turn!
    By McPete in forum WOODTURNING - GENERAL
    Replies: 7
    Last Post: 7th March 2014, 11:10 AM
  4. My chisel Cabinet- Minus the chisel holders
    By Eldanos of KDM in forum WOODWORK PICS
    Replies: 18
    Last Post: 11th July 2011, 09:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •