Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2004
    Location
    Brisbane (western suburbs)
    Age
    77
    Posts
    12,093

    Default Making a mini-chisel

    A long time ago, I wanted a chisel for cutting slots narrower than 1/8" (for small lock-tongue mortises, etc.). So I cobbled one up by grinding down an old chainsaw file. It worked well enough, & I even made a nicer handle for it sometime down the track, but I admit it was a bit of a rough diamond. Then Derek Cohen showed us the 1/8 chisel he'd made, which made my effort look right dowdy. In the true spirit of a tool tragic, I felt obliged to do better, & when I saw a piece of 3/32 HSS at the woodshow for a mere $10 or so, I thought I'd have another run at it.

    The piece was quite large, & grinding it down was out of the question, so it had to be cut. I did that by clamping it between two bits of 3/16 steel & using a 1mm cutoff wheel. I was worried it might affect the hardening, & took it very carefully, but the steel didn't get very hot at all, even on the free side. I tested the exposed bit after cutting, & it remained much too hard to file, so no softening occurred.

    I ended up with two roughly chisel-shaped pieces (Pic 1), & made two chisels- a mini mortise as intended, plus a small bevel edge (Pic 2). To shape the bevel I used a coarse diamond stone - took an hour or so to get it even & neat, but was much safer than trying to grind it. It's a pretty delicate looking thing, but I tested it by putting a fair amount of leverage on the narrow end & it stood up. However, I certainly wouldn't recommend bashing it into dry ironbark unless you wish to see it shatter...

    The last pic compares the original roughie with the new BE. Much happier with the appearance now ....

    Cheers
    Attached Images Attached Images
    IW

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2001
    Location
    Perth
    Posts
    10,810

    Default

    Nice one Ian! In fact, nicer than the one I made. Gad, now I'll have to make another!

    Regards from Perth

    Derek
    Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.

  4. #3
    Join Date
    Mar 2004
    Location
    Brisbane (western suburbs)
    Age
    77
    Posts
    12,093

    Default

    Quote Originally Posted by derekcohen View Post
    ...... In fact, nicer than the one I made. Gad, now I'll have to make another!
    I wouldn't say it was any better Derek - no need to start an arms race! I am pretty pleased with the way the little BE came up, though, so my thanks to you for giving me the idea. It isn't something I have a great need for, I have to admit, but what else was I to do with that scrap of HSS?

    Both chisels are so small I was easily able to squeeze them in the drawers with their matching big brothers (or sisters?). And the best part of it all is that since sets of chisels only count as one tool, I don't have any more tools than I had last week.

    Cheers,
    IW

  5. #4
    Join Date
    Jul 2008
    Location
    Aspley, Brisbane
    Age
    46
    Posts
    362

    Default

    Quote Originally Posted by IanW View Post
    And the best part of it all is that since sets of chisels only count as one tool, I don't have any more tools than I had last week.
    Nice chisels and a great justification.


    Regards,

    Denim

  6. #5
    Join Date
    Jun 2008
    Location
    Victoria, Australia
    Age
    74
    Posts
    6,132

    Default

    Hi Ian,

    Nice job, I find those small chisels are often the trickiest to shape and sharpen, you probably didn't have to worry too much about over heating, HSS is generally fairly tolerant of over heating.

    Just for interest's sake what is a "lock tongue mortise"?

    EDIT: Never mind, I just twigged, it's the mortise for the tongue of a lock for some reason I was imagining a variant of a draw bored mortise and tenon.. being that size, I guess it's a jewellery box or small drawer.

    Regards
    Ray

  7. #6
    Join Date
    Mar 2004
    Location
    Brisbane (western suburbs)
    Age
    77
    Posts
    12,093

    Default

    Quote Originally Posted by RayG View Post
    Hi Ian,

    Nice job, I find those small chisels are often the trickiest to shape and sharpen, you probably didn't have to worry too much about over heating, HSS is generally fairly tolerant of over heating.

    Just for interest's sake what is a "lock tongue mortise"?

    Regards
    Ray
    Hi Ray, yes, I am assured by a much more metal-savvy friend that HSS can be cherry red & remain below the critical temperature. To be accurate, I was more worried about embrittling the steel, or causing cracking, than I was about softening it.

    A lock-tongue mortise is just the hole wot the tongue of a drawer or door lock fits into. Little locks have tongues that are quite thin, down to 1/16" in really tiny locks, & ranging up to 1/8" or more thick on larger locks. You can get away with digging out a hole with say a 1/8" chisel, then covering it with a brass 'striker' plate with a slot of the right width. The idea is to keep the fit pretty close, so the door doesn't rattle, if the lock is the sole means of keeping the door closed (as it often is). Being a fuss-budget, I like to keep the mortise pretty close to the right size, too, hence the occasional need for some rather skinny chisels.

    Cheers,
    Edit: Woops, didn't see your edit. "Yes, you are correct on both counts" would have been the appropriate answer....

    2nd Edit: Yairs, you are also right about sharpening narrow chisels, I also find them the hardest, particularly as I freehand everything. Difficult to keep tha narrow bevel straight & even!
    IW

Similar Threads

  1. First go at making a beam/mini mill
    By BobL in forum SMALL TIMBER MILLING
    Replies: 45
    Last Post: 26th December 2011, 11:03 AM
  2. Paring chisel making... Lets see em!
    By two fingers in forum HAND TOOLS - UNPOWERED
    Replies: 79
    Last Post: 18th November 2010, 09:43 AM
  3. Making chisel handles from Ash wood.
    By JJK in forum WOODWORK - GENERAL
    Replies: 10
    Last Post: 23rd October 2007, 06:07 PM
  4. Jet mini versus Leda mini
    By bloggs1968 in forum WOODTURNING - GENERAL
    Replies: 18
    Last Post: 15th August 2006, 10:03 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •