Thread: eBay (and other auctions) Metalwork Stuff

Originally Posted by Stustoys

I like that they haven't lost the screw that has come loose and fallen out.

Stuart

If it does then we need to spend another $10 for the screw

Peter

Originally Posted by Ueee

I think the bottom shaft is the motor fwd/rev shaft. The switch may be located under that cover on the end of the bed. This is how the C10 is. It keeps the switch away from the oily end of the machine. The other shaft could be a knock out for the feed?

Ha, it has a lead going to the apron so maybe not then, the FWD/REV controls would be on the apron. Beats me.....
Ew

Having a bit of a look around it looks a bit like a MAS lathe, but not quite, and all the MAS's i can find are only double V beds.

Found out it is a Wafum TUD50.. Polish made...... There is a video of one on youtube, the second bottom shaft is for rapids on the saddle...

http://www.ebay.com.au/itm/Herbert-S...item4181892a5f

any one want a turret lathe ? look like a very good buy to me .

Peter

Originally Posted by thorens

http://www.ebay.com.au/itm/Herbert-S...item4181892a5f

any one want a turret lathe ? look like a very good buy to me .

Peter

If freight was not a issue I would be all over it...:::

thorens http://www.ebay.com.au/itm/Herbert-S...item4181892a5f

any one want a turret lathe ? look like a very good buy to me .

The best thing about it is it has all the tooling, in normally missing with most turret lathes advertised.

Originally Posted by Stustoys

I like that they haven't lost the screw that has come loose and fallen out.

Stuart

http://www.ebay.com.au/itm/Metric-Ga...3D161275288558

I bet the screw fell out during the photo session, it's there in some pictures not in others..

Ray

Someone got a bargain.. pity it wasn't closer to home.. Cazeneuve are up there with Schaublin on my "to buy" list...

http://www.graysonline.com/lot/0032-5009871

Ray

Wonder if the spindle will fit mine?

Pity its over there

http://www.ebay.com.au/itm/waldown-d...item258f378603

my two were a bargain ..even if one does need a new airspindle assembly

http://www.machines4u.com.au/view/ad...rpener/127718/

Originally Posted by eskimo

my two were a bargain ..even if one does need a new airspindle assembly

http://www.machines4u.com.au/view/ad...rpener/127718/

A companion to the E90, a DarexV391 (drill bit version) went today http://www.graysonline.com/lot/0615-...-in-203818-615 for $749+rip

I was expecting RQ Adelaide to be in the bidding list

Ray

Originally Posted by eskimo

my two were a bargain ..even if one does need a new airspindle assembly

http://www.machines4u.com.au/view/ad...rpener/127718/

What is wrong with the air spindle, it looks ok in the photo?

You will enjoy this machine, they do a superb job on cutters, the only caveat is you'll need to keep track of cutter size as you sharpen them as the cutters are undersize. I've been caught out once or twice when cutting slots and have forgotten the cutter I was using was well undersize.

Originally Posted by Pete F

What is wrong with the air spindle, it looks ok in the photo?

You will enjoy this machine, they do a superb job on cutters, the only caveat is you'll need to keep track of cutter size as you sharpen them as the cutters are undersize. I've been caught out once or twice when cutting slots and have forgotten the cutter I was using was well undersize.

no Pete...the other one that I bought did'nt have an airspindle..I will need to make one or sell it as is and let buyer copy my airspindle so he can make

Originally Posted by RayG

A companion to the E90, a DarexV391 (drill bit version) went today http://www.graysonline.com/lot/0615-...-in-203818-615 for $749+rip

I was expecting RQ Adelaide to be in the bidding list

Ray

.

I got two sets of Darex drill jigs with the 2nd E90....

Hercus mill in Qld(?):

http://www.gumtree.com.au/s-ad/toorb...ine/1047658507

Ben