Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Mass wood identification?
-
7th January 2020, 10:12 AM #1Senior Member
- Join Date
- Sep 2019
- Location
- Somerville
- Age
- 50
- Posts
- 295
Mass wood identification?
Hi all. Total woodwork novice here, who recently purchased lots of pieces of small timber from a box-maker. They mostly seem to be a handful of varieties, but I really have no idea what they are at all. What's the best way to identify them? If we discount "tasmanian oak" (from labels) and a dark wood that I assume is Merbau, and a couple that are labelled (blackheart sassafras), how would I identify the others?
And in fact, how much does it matter? Will knowing what wood it is effect how I should prepare or finish it, or what applications I might use it for?
Even a bunch of squares I found, which are probably samples, aren't labelled - so are kindof useless to me. Could you guys identify those, so I can attempt to match against the other wood?
IMG_0682.jpg
-
7th January 2020 10:12 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
7th January 2020, 11:20 AM #2Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
Top row, 2nd left looks like Blackwood and I suspect the dark one next to it is the same.
-
7th January 2020, 01:38 PM #3GOLD MEMBER
- Join Date
- Apr 2015
- Location
- Warragul Vic
- Posts
- 1,093
Speaking generally, its hard to identify woods from a picture like this. More & better pics are required + comments on density, odour freshly cut planed faces & ends etc
There an many commercial and sub-commercial species, potentially hundreds. ID can come from features like colour, density, odour grain & figure which is distinctive to some species or (more likely) to Genera (groups of related species). Initially I suggest you seek the opinions of a few people who have handled a lot such craftwoods but even so you will likely get contrasting & differing opinions based on their experience. There are formal methods - referring to books (eg Bootle) or to accurate reference samples (eg available through some societies eg IWCS or their members) or even showing these commercial suppliers and asking for their opinion,
Correct identity is up to you, the buyer of receiver of your crafts even as salt and pepper grinders. Most buyers DO appreciate and value knowing what the wood is where it comes from and its history.
What the wood is will certainly affect how it is used, worked and finished. The sources mentioned above as well as advice from members of a wood club or group like this forum will be very helpful.
Euge
(PS: I can help with wood names, uses & IWCS contacts if required. PM me )
-
7th January 2020, 03:59 PM #4Senior Member
- Join Date
- Sep 2019
- Location
- Somerville
- Age
- 50
- Posts
- 295
Maybe I'll start with a couple of the weird ones, and a couple of grab-bags that might be anything
First one has shiny diagonal "smears" in it depending on the angle of light
IMG_0695.jpg
Second one is very very light, shiny, and currently has rough finish
IMG_0690.jpg
third one has strange holes and a white smear. fairly heavy.
IMG_0693.jpg
I can't read the writing on most of the samples.
Top 3 on left are blackheart sassafras
Top 3 on right are blackwood, then 2 myrtle
No idea on the others. Is "RH Leatherwood" a thing? And bottom left is something-sassafrass? (ed: Spalted?)
samples.jpg
Bonus round, identify any of the below.
random 1.jpg
random 2.jpg
I'm looking at
| WoodSolutions
| WoodSolutions
and
The Wood Database
Trying to spot things, but hard to match against so many :/
-
7th January 2020, 04:15 PM #5Senior Member
- Join Date
- Sep 2019
- Location
- Somerville
- Age
- 50
- Posts
- 295
Samples:
I think the 5th and 6th down on the left of the samples are Huon Pine
And google tells me Red Heart Leatherwood is another tasmanian timber.
I'm afraid I'll waste something cool just because I don't know what it is. I've got heaps of the dark-brown one, will start playing with that
-
7th January 2020, 05:05 PM #6GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,559
Looks like an oak and the other cedar. Now which oak and which cedar is the next question.
-
7th January 2020, 05:26 PM #7GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,039
Second one looks like Australian Red Cedar and your description matches it, but it could also be, closely related, Surian Cedar. The 'samples' are highly likely to be all Tassie timbers that came as a job lot. Apart from the ones you have identified in the 'samples' there is possibly some Celery Top Pine, Tasmanian Blue Gum is another possibility. I don't see anything in any of your pictures that looks like Merbau.
-
7th January 2020, 06:27 PM #8GOLD MEMBER
- Join Date
- Apr 2015
- Location
- Warragul Vic
- Posts
- 1,093
You haven't replied to me BUT I will continue to reply to you.
Top one with "smear" (rays) looks like a casuarina to me BUT could be an oak or less likely a silky oak.
The lightweight, "shiny one" may be Qld maple
you have answered and read most of the samples ... Tas blackwood & Tas myrtle
I see 'spalted sassafras' and redheart leatherwood (all Tas) ... yes its "a thing"
There is bound to be Huon there (pick by its smell of fresh sawn or planed face) and cream oily wood
Celery Top Pine pronounced fine growth rings, pale & King Billy Pine (pinkish very light weight faint smell) may be there too
Looks like most are labelled among the "samples" but just not easy to read. Thats the thing. I do see huon there at least 2 .
ID wood is a learning process. the more you see smell and handle the more you will learn
E
PS: Try looking and learning about Tas timbers .. most seem to be these
-
8th January 2020, 09:33 AM #9Senior Member
- Join Date
- Sep 2019
- Location
- Somerville
- Age
- 50
- Posts
- 295
I'm not ignoring you @Euge Thanks for the tip, but I'm not sure I have the skills to readily identify wood by smell or density (though I could weigh and estimate volume, for a density figure if that helped - but i figured the dryness of the would be change that number a lot).
There's seriously so much stuff, I have no idea what 90% of the varieties are (but, by volume, most of it is Tasmanian Oak, and a dark brown pretty dense wood that I assume is Merbau).
I need a local "wood buddy" who knows about how to setup a workshop, wood identification, and basic woodworking skills Problem is Mens Sheds seem to only be setup for retirees and I still have work/family.
-
8th January 2020, 12:21 PM #10GOLD MEMBER
- Join Date
- Apr 2015
- Location
- Warragul Vic
- Posts
- 1,093
Its all a journey …. there is a lot to learn re wood and the learning process is more valuable (IMO) than the ID of all of these. Use them as a start but realise that Tas has many more, Qld more again and those from WA are also unique and different species (not varieties).
Most of what you have are labelled are identified. Some with gum veins are likely eucalypts eg Messmate stringybark. Huon once you smell it will always be recognisable. Look for distinctive features of each species of wood and see as much wood (identified reliably) as possible. Men's sheds may not be the best place for you, but there may be other wood clubs. Look at wood suppliers stocks, look through mags and books like Bootle, talk to people here … learning is this way is best way & there are no short cuts IMO.
There may be a prospective wood buddy near you who makes hand tools for wood and knows his woods too. You could learn a lot from him. (suggest: Chris Vesper of Vesper Tools, Carrum Downs.. google and see if he will meet you)
a journey …. there is a lot to learn re wood and the learning process is more valuable (IMO) than the ID of all of these. Use them as a star
-
8th January 2020, 01:53 PM #11
From my experience the following could all be Tasmanian Blackwood. I'm not saying definitively that they are just I've seen pieces of Blackwood that have looked very similar.
Top 1,3 and 7
Bottom 1,2,4,5,6,7
Tasmanian Blackwood has such a wide colour range it is incredible, I'll post a picture of a few pieces this evening. Also Blackwood has a very light sapwood that can spalt like in the first piece in the bottom row. It also frequently produces that white noise affect like in the fifth piece in the bottom row.
-
10th January 2020, 06:39 AM #12GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
CSIRO produced a wood identification card deck. Several hundred species.
Wood anatomy is as clearly distinct as finferprints. That means thin sections and a microscope.
The banding you see are multiseriate rays. Learn about vessel element size and ring porous vs diffuse porous.
Read about the tyloses which seal the wood of white oaks for whiskey/sherry/wine barrels while the red oaks leak like a sieve.
Similar Threads
-
Wood identification help!
By Lappy in forum TIMBERReplies: 11Last Post: 20th March 2014, 07:43 PM -
Wood identification
By rlgriffo in forum WOODWORK - GENERALReplies: 12Last Post: 7th August 2011, 06:02 PM -
Wood Identification
By Macropete in forum TIMBERReplies: 20Last Post: 18th November 2008, 12:20 PM -
Wood Identification
By Matt88s in forum WOODWORK - GENERALReplies: 0Last Post: 3rd September 2007, 03:35 PM -
Wood Identification
By BernieP in forum WOODTURNING - GENERALReplies: 1Last Post: 23rd December 2006, 12:09 AM