Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Ezycut Gilpro
-
23rd March 2016, 09:14 AM #1New Member
- Join Date
- Mar 2014
- Location
- Morwell. Victoria. Australia
- Posts
- 3
Ezycut Gilpro
Not sure if this is the right forum as is my first post but here goes.
Just purchased a table saw/planer in reasonable condition.
On the dust bag is only identification -EzycutGilpro.
Have searched the net but cannot find any information - can anybody help.
Regards
Dave A
-
23rd March 2016 09:14 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd March 2016, 09:45 AM #2GOLD MEMBER
- Join Date
- Jun 2003
- Location
- Sunbury, Vic
- Age
- 84
- Posts
- 2,718
Hi Dave
Welcome aboard a very helpful forum.
There have been 2 or 3 threads about Gilbro machines so a search on here should yield some info. There was a thread in just the last couple of weeks. MalB has put up some useful info in recent times.Tom
"It's good enough" is low aim
-
23rd March 2016, 09:50 AM #3
Welcome to the forums Dave. Ezycut used to be a manufacturer in Mordialloc. As far as I know they made lapidary equipment as well as woodworking stuff. There are a few ezycut threads on the forum if you search or look at the similar threads links at the bottom of this threads page.
There is currently an ezycut lapidary catalogue listed on ebay.
Cheers, Franklin
-
24th March 2016, 08:51 AM #4New Member
- Join Date
- Mar 2014
- Location
- Morwell. Victoria. Australia
- Posts
- 3
Thanks heaps.
Similar Threads
-
help with old ezycut scrollsaw
By scrounger in forum SCROLLERS FORUMReplies: 2Last Post: 3rd January 2013, 10:52 PM -
Old Ezycut about to be re-birthed
By Grandad-5 in forum BANDSAWSReplies: 19Last Post: 23rd December 2012, 10:32 AM -
Ezycut
By RJT in forum GENERAL & SMALL MACHINERYReplies: 1Last Post: 25th April 2012, 09:16 PM -
Thoughts on this old Ezycut BS
By RedShirtGuy in forum BANDSAWSReplies: 5Last Post: 24th May 2010, 10:41 PM -
Ezycut Scroll saw
By onetwoone in forum SCROLLERS FORUMReplies: 0Last Post: 5th November 2009, 03:52 AM