I have an old GE motor from the 1930's it was on my 1930 metal lathe a monster the switch is oil filled I will try to read the plate and some photos when I get over this flu
Printable View
I have an old GE motor from the 1930's it was on my 1930 metal lathe a monster the switch is oil filled I will try to read the plate and some photos when I get over this flu
G'day All
Picked up another motor from my contact. Intially asked if he could keep any flat belt pulleys he came across before he scapped any motors or equipment. After seeing it after it had been pulled out it was to interesting to scrap. I had seen this motor in postion it used to drive a small line shaft setup for a printing shop, missed out on the starter for the motor went to the scrap man last week:sad1:. However I will be picking up the line shafting tomorrow.
Cheers Hugh
Recently got back from a holiday in Japan and thought I'd share some of the oldies from the Toyota Museum of Industry and Technology.
40hp Siemens-Schukert. This probably ran the entire shaft drive system for the cotton mill (where Toyota began, as Toyoda)
Attachment 392692Attachment 392691
A few more from the cotton mill
Attachment 392694Attachment 392693Attachment 392690
500hp generator on the back of a steam engine
Attachment 392698Attachment 392697
GE and Westinghouse from the metalworking side of Toyota
Attachment 392696Attachment 392695
I'll do another post with pics of the machinery; it's all metalworking gear so I hope I'm allowed to post it :p