Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
5th July 2021, 02:54 PM #1New Members
- Join Date
- Jun 2021
- Location
- Australia
- Posts
- 2
PaulCall Radial Arm Saw.... looking for manuals/info/Parts
G'day all.
I've recently come into possession of a "60's" PaulCall Radial Arm Saw.... 3/4 arbor and missing the outer flange to hold the saw blade (it was also missing the left hand thread nut.... but I've managed to find a replacement) it runs and all the bearings, rollers and rails seem in great condition!
I'm mostly hoping that someone here might have some info on it and might also know where (or have) the flange might be acquired... without the flange I'm not able to properly fasten the blade in place.
I'm in Melbourne (Australia) and would love to restore this machine to working order.
Any help/guidance greatly appreciated
Cheers
Swiss
-
5th July 2021 02:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th July 2021, 03:53 PM #2China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
You won't find a manual I've been down that road, the flange will have to be custom made, there simply is no spares around for these, I can measure the flange on mine if that is any help, any competent metal turner could make one,
it is a pretty simple task, if you are au fait with radial arm saws you won't need a manual it is all straight forward.
-
5th July 2021, 08:01 PM #3New Members
- Join Date
- Jun 2021
- Location
- Australia
- Posts
- 2
Oh Dimensions would be really cool. Thanks.
My Grandad would often say "No harm in asking"...
I got the radial arm saw in place of getting a table saw...
So imagine my annoyance when I discovered how rare the tiny part would be...
Your help is appreciated.
Any one recommend a Melbourne machinist who might be capable.
-
6th July 2021, 05:02 PM #4GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 68
- Posts
- 2,343
Welcome to the forum.
-
6th July 2021, 06:04 PM #5China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
Couple of pics
P1010464.jpg
P1010465.jpg
Diam -57.3 mm
Thick - 5.8 mm
Recess - 1.1 mm
Centre Hole 19.6mm
I can't recommend any one interstate ( I am in SA
However if you go over the metalwork forum I am sure you find some one near you that can help
-
12th July 2021, 10:24 AM #6
I reckon it's probably machined out of cast iron as well. You can get small lengths of Ductile Grey Cast Iron off Flea Bay at reasonable costs.
Gaza
Similar Threads
-
Paulcall radial arm saw 9"
By Chess in forum WOODWORK - GENERALReplies: 3Last Post: 24th October 2021, 09:37 AM -
I have not seen this in the spare parts manuals
By MWF FEED in forum THE HERCUS AREAReplies: 0Last Post: 12th April 2021, 10:30 PM -
Help please: Paulcall Radial Arm Saw blade alignment & user manual
By timber-turner in forum GENERAL & SMALL MACHINERYReplies: 6Last Post: 4th December 2020, 04:28 PM -
WANTED:QLD. PaulCall branded parts
By Clinno in forum WANTED & WANTED TO BUY - in AustraliaReplies: 5Last Post: 15th August 2017, 07:33 AM -
mcmillan ml 24 lathes - looking for info /manuals /anything
By nathanjames in forum METALWORK FORUMReplies: 1Last Post: 20th April 2015, 07:59 PM