Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: PK Douglas Compositors Saw
-
3rd April 2015, 10:20 PM #1Senior Member
- Join Date
- Dec 2011
- Location
- geelong
- Posts
- 125
PK Douglas Compositors Saw
Greetings
Some snaps of a recent find; took a punt for 10 clams.
A little brother for the Wadkin PK; sliding tables forever!
So far is responding well to treatment but I am having trouble with removing the blade end bearing retainer.Is it RH or LH Thread?
Any body out there with one of these?
I may have to get heavy handed with the arc welder and a length of three quarter bar.
Otherwise going well
Chers
Tony
-
3rd April 2015 10:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th April 2015, 09:39 AM #2Senior Member
- Join Date
- Mar 2014
- Location
- Beach
- Posts
- 166
Nice little saw.
Be good with a bit of TLC.
Try soaking that nut and thread with brake cleaner a few times before the oxy step.
I can't help you with L or R, I've seen both on saws which is a bit scary when you think about it.
Have fun,
Alli
-
4th April 2015, 06:10 PM #3GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
That brings back some bad memories. I did my apprenticeship as a comp and thankfully never went back to it after a stint of Nasho service.
CHRIS
-
4th April 2015, 08:52 PM #4
I have had a few of these and now have a Hammond Glider (floor model).
I may have access to a bad copy of a catalogue somewhere.
These were made in Sydney by the same mob who made the shapers that every school metalwork dept had.
I assume you have removed the saw bade by undoing the 3 set screws.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
5th April 2015, 12:23 PM #5Senior Member
- Join Date
- Dec 2011
- Location
- geelong
- Posts
- 125
Clearout
A friend of mine has one of the shapers and is well pleased with it.
Two of the saw retaining screws undid although heavily rusted.
The third was a troublesome customer but eventually responded with a petite cold chisel. BSF countersunk; Ill have to make a replacement.
The drive end bearing retainer was rust free and moved freely but the other end is not budging even with oxy heat.
I am suspicious of a LH thread and am close to trying the 3/4 bar welded across the face for a large handle and some serious heat.
But which way to apply force?
Reminds me of Malcolm Fraser; life wasnt meant to be easy!
The rust on the rest of the saw has cleaned well with no pitting.
The motor has plain bearings and dates from 1948 but may not be the original.
Right; I have been thinking about this.The sawblade rotates clockwise with regard to the retainer so it must be RH thread like a push bike pedal crank.
The drive end should be LH thread if any.
Spindle is to RHS of blade from sawyers position.
Sounds like a job for Abraham Lincoln the DC welder. Not Washington DC.
Will report back.
Cheers
Tony
PS Ignore my inane talk of drive side versus saw side; the drive is on the blade end.
The non saw blade end has a grinding wheel for ?.
I have had it pulled apart for too long!
The physics still applies to the bearing retainer.
-
5th April 2015, 09:18 PM #6SENIOR MEMBER
- Join Date
- Nov 2011
- Location
- Newcastle NSW
- Posts
- 775
Tony,
These look to be great little saws for appropriate material, I've seen Henry's one in person and can see reasons to have one in your workshop, so congratulations. These are often referred to as Printer saws, they were used for trimming the metal type I always thought this was the reason for the wheel, but looking further into it, it appears at least one purpose was to sharpen the blade).
As far as removal goes, if your anything like me, the best advice I can give at this point is put the welder down, give it a soaking, and walk away. Given what you have already done, I suspect you are missing a piece of the puzzle and risk breaking something if you up the force (perhaps not, but worth giving it some time, than risk breaking something). I'm sure someone will be by shortly to help.
Can we get some pictures of what stage you are at, have you looked for grub screws, can you see any of the thread, etc.
cheers,
Camo
-
6th April 2015, 01:09 AM #7GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
I used quite a few of these back in the day and I never saw one with a grinding wheel. I can't even think why it would have one as grinding lead is not a really good idea on any day. They were used to cut lines of Linotype, strips of lead for line and para spacing and occasionally Stereo blocks. I saw a fellow student cut his thumb off at tech one day, it was fairly effective at that! he was the only person who I recall was injured on one which is surprising when I come to think about it. I cannot recall any specific tuition in how to avoid injury but it was so long ago I may have forgotten.
CHRIS
-
6th April 2015, 10:11 AM #8SENIOR MEMBER
- Join Date
- Nov 2011
- Location
- Newcastle NSW
- Posts
- 775
Chris,
Makes sense. I had a look around and found this:
https://archive.org/stream/HillCurti...ge/n4/mode/1up
page 4, shows setup for sharpening blades.
Cheers,
Camo
-
6th April 2015, 11:25 AM #9GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
The grinding wheel was for sharpening purposes? I never saw one as I said though memory fades after forty years so anything is possible. All our blades went out for sharpening and the ones at tech I presume did the same. They were a fantastic little saw with the fine adjustment for cutting length built in. There was a hand cutter as well which did single lines and worked like a small guillotine.
CHRIS
-
6th April 2015, 03:44 PM #10Senior Member
- Join Date
- Dec 2011
- Location
- geelong
- Posts
- 125
Cam
Lovely bit of dirty paper!
A lot of stuff makes more sense now. Grinding wheels for blade sharpening and for sharpening the trimmers located in the drive flange.
The Ben Franklin and the Douglas had a bit in common.
So! My problem has been solved with thanks to you all for your input.
Main problem, operator error!
One end of spindle RH Thread; Other end LH Thread as per earlier post.
Once the operator had worked out one end from other the retainer undid with heavy persuasion and no Heat!
The retainer is damaged but a skim in the lathe and two new pin holes will see things right.
The spindle cavity contained some evil grease; New bearings will be rubber sealed.
Will post some further restoration details as work progresses.
Cheers
T
-
6th April 2015, 07:06 PM #11SENIOR MEMBER
- Join Date
- Nov 2011
- Location
- Newcastle NSW
- Posts
- 775
Tony,
Glad you got it worked out, and no major damage. Looking forward to seeing more of this saw as you progress.
cheers,
Camo
-
7th April 2015, 10:22 AM #12
I had one of the printers saws and gave it to a friend. I agree with henry the Hammond gliders look to be the best suited to wood working conversion. Crzypete @ Machine junkie is world know for converting these and here is that sub forum at his site, Lots in the archive there on these machines. The grinding stone is for sharpening the cutters knifes for the lead type that these saws cut. and many convert that to a slot mortiser.
Machine Junkie Forum
http://www.machinejunkie.com/forum/v...7d69e37d00a8f0
PDF rebuild
FWW did a artical back in 1983 on there use as woodworking machines and hereis a PDF on that.
http://vintagemachinery.org/files/PD...ond-Glider.PDF
jack
English machinesAll tools can be used as hammers
Similar Threads
-
douglas fir
By robyn2839 in forum TIMBERReplies: 7Last Post: 19th August 2012, 12:27 AM -
Douglas Shaper
By lamestllama in forum METALWORK FORUMReplies: 41Last Post: 1st March 2012, 01:13 AM -
Douglas Fir or Spruce
By carson in forum TIMBERReplies: 7Last Post: 5th July 2009, 11:12 AM -
Douglas Fir
By Simomatra in forum TIMBERReplies: 0Last Post: 10th July 2008, 05:54 PM