Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Unknown make Bandsaw
-
18th October 2017, 03:28 PM #1Senior Member
- Join Date
- Jul 2010
- Location
- Brisbane
- Posts
- 107
Unknown make Bandsaw
Hi... Does anyone recognise this band saw ? .. no markings anywhere on the machine.. Its a 14 inch x approx 91 inch blade.. No play in the bottom end, but the top needs attention, and looks a bit lightly constructed in comparison.
A bit worried about the fitting of the guide mounting rod/bar... Its a hex bar that appears to have lead poured around it !!.. the hex stock does not appear to be original.
Ken.
-
18th October 2017 03:28 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th October 2017, 07:10 AM #2
I don't recognise the saw. However the use of whitemetal (babbit) around the top guide bar is not unusual (at least in older bandsaws). My 1928 30" Preston has a similar arrangement around a square bar.
aPresWmetal1.jpg
I guess what matters is whether the bar (and guide) holds the blade in line with the wheels. If not, you may need to melt out, and re-pour, the whitemetal.
Cheers, Vann.Gatherer of rustyplanestools...
Proud member of the Wadkin Blockhead Club .
-
19th October 2017, 05:00 PM #3Senior Member
- Join Date
- Jul 2010
- Location
- Brisbane
- Posts
- 107
Thanks for the reply.. Luckily the guide lines up perfectly with the wheels...Today I attempted to strip down the pivoting top axle assembly but hit a snag. the casting that holds the axle, pivots on two small pins that are driven in from either side.. I thought it unusual and a weak point.
Similar Threads
-
Make and vintage of P A 24" Bandsaw
By Yanis in forum ANTIQUE AND VINTAGE MACHINERYReplies: 2Last Post: 19th October 2015, 09:25 AM -
how to make a collapsible castle on your bandsaw
By flyfisher in forum WOODWORK - GENERALReplies: 3Last Post: 6th February 2013, 10:40 PM -
Unknown tree with an unknown growth.
By Durdge39 in forum TIMBERReplies: 9Last Post: 17th January 2011, 11:38 PM -
what make of bandsaw
By love da wood in forum BANDSAWSReplies: 17Last Post: 18th February 2010, 09:06 PM