![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 13 of 13
Thread: Vintage Bandsaw ID
-
16th April 2020, 01:27 PM #1
Vintage Bandsaw ID
Hey Guys,
I am likely buying a large vintage bandsaw in the coming weeks, thought I would post some pics here to see if anyone could ID it.
The guy I am buying it off does not know. It has 700mm wheels so I guess that means it can't be too old as it's not a straight imperial wheel size.
Its table is 1040 by 700, so lots of space to play with.
Thanks,
Tom
-
16th April 2020 01:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th April 2020, 04:21 PM #2
It looks small, but if those wheels are 28" (=700mm) then it's certainly a decent size.
I can't help with identification, sorry. Is the frame cast iron, or is that pressed steel?
Cheers, Vann.Gatherer of rustyplanestools...
Proud member of the Wadkin Blockhead Club.
-
16th April 2020, 06:36 PM #3
Yeah the photo defiantly gives the impression it's small.
But it's 2300mm high apparently so defiantly a substantial machine.
I have not seen it in person yet so could not say.
The seller is a nice older man but I think his hearing is poor as the phone calls are quite hard to get much information across. He also doesn't know how to send pictures via text.
Just hard to see in person with current measures, especially considering I wouldn't want to pose any risk to him.
Thanks,
Tom
-
17th April 2020, 09:32 PM #4
GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
It looks very much like this one: Wadkin DN Bandsaw Restore - Early 1900s
but you could probably ask the original poster of that thread. Looks a nice old girl though, in good nick, good luck.
-
18th April 2020, 07:52 AM #5
Its definitely very similar, but the c section frame is quite different. Thanks for your thoughts
Sent from my SM-G950F using Tapatalk
-
18th April 2020, 07:59 AM #6
GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
If you zoom in on the photo of the blade guides the back one has a distinctive emblem on it as well, that’s a good clue. Just have to find someone who knows it.
-
18th April 2020, 07:15 PM #7
You are onto it with the emblem! Someone said similar on OWWM. Its a centauro, an Italian made machine.
Found an old auction site listing of another.
Band-Saw-Centauro_38213552.l.jpg
Band-Saw-Centauro_38213554.l.jpg
Band-Saw-Centauro_38213555.l.jpg
-
20th April 2020, 06:02 PM #8
-
20th April 2020, 06:03 PM #9
So it is a pressed steel frame, as Vann thought it might.
-
20th April 2020, 10:11 PM #10
A mate has an earlier cast iron framed 24” one up in Brisbane.
Lovely machine and amazingly compact for its capacity.
There was a bigger Saw with a huge throat capacity slod from a Patternshop here in Sydney a few years back. I may have a photo somewhere.
Be interesting to se how that pressed frame damps the vibes.
They changed that design later, I’ve had a watch on a few sites and the later fabricated ones are the only ones that show up.
Those Jolly Saw guides are on my Wadkin Bursgreen 20” fabricated saw.
I think they were used on a lot of saws.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
21st April 2020, 08:18 AM #11
Do you find that guide type works well?
In my research have definitely seen a bit of the newer fabricated ones around. Alot more information on them.
I am really happy about the size, should be as big as I ever need and closer to the 32inchers fhen say a 20inch that might leave you always wanting a bigger one.
Yeah really keen to see how smooth it runs.
Sent from my SM-G950F using Tapatalk
-
21st April 2020, 10:45 PM #12
SENIOR MEMBER
- Join Date
- Oct 2009
- Location
- South Africa
- Posts
- 950
There is currently one of those on sale not all that far from me (well, a five hour drive). They want the equivalent of around $1000 though, which is more than I’ve got lying around. And then there’s the transport and so on. I suspect that my brother-in-law might lose his sense of humour if I ask him to collect it for me. Either that or he’ll collect it and keep it!
EditI took some screen-captures to preserve the pictures for when the listing gets removed.
-
22nd April 2020, 02:35 PM #13
Thanks for posting the pictures, cool to see more of them out there. Definitely a bit of a drive.
Can't wait to see it in person
Sent from my SM-G950F using Tapatalk
Similar Threads
-
Advice with second hand vintage bandsaw
By yoboseyo in forum BANDSAWSReplies: 9Last Post: 5th August 2019, 09:01 AM -
Advice on vintage bandsaw please.
By blackheart in forum BANDSAWSReplies: 7Last Post: 2nd September 2007, 10:03 PM -
Vintage bandsaw sharpener
By powderpost in forum BANDSAWSReplies: 5Last Post: 5th January 2005, 10:20 PM