Results 1 to 8 of 8
  1. #1
    Join Date
    Jan 2012
    Location
    South Australia
    Age
    63
    Posts
    8

    Default vintage(paulcall) 6 inch jointer_Help_

    Hi,

    I recently bought the is vintage Paulcall 6 inch jointer, I have never bought any old machinery before and don't know much about this particular brand, the exact age of it or its value.
    i would greatly appreciate if any one could be me any background information on this particular model.
    I have taken the jointer apart and replaced the all bearings connected to the the cutter-head ,re-greased where needed set new blades in it, added two new pulleys,tuned the machine up.

    The vintage jointer now works true and is great to use, I have done some research on the net about this paulcall jointer and have found very little information about it.Having looked at vintage 6 inch jointers on the net I have seen similar jointer with different brands that probably date my jointer around the late mid to 1930's or early 40's.


    I also downloaded an old 1930's jointer instruction manual which gave me a lot of information about setting the jointer up but I still don't have any history info about my particular Paulcall jointer.

    I have attached photos of my jointer, so if there is anyone out there in woodwork world that has an interest in vintage woodworking machinery has some knowledge that they can share about my vintage Paul 6inch jointer it would be great to hear from you.

    Thanks

    Mark

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2009
    Location
    Armadale Perth WA
    Age
    54
    Posts
    4,524

    Default

    Hi Mark,

    I can't help but I'm also interested in the Paulcall brand.
    There's a damn good chance Matty has some knowledge about it.

    I have a small Paulcall bandsaw , and a General jointer about your vintage.
    There are pictures in my Album section.
    https://www.woodworkforums.com/member...ums/machinery/

    Cheers,
    Paul

  4. #3
    Join Date
    Aug 2004
    Location
    Perth WA
    Posts
    2,035

    Default

    What on earth struck you to buy that.

    By the way welcome to the forum
    Experienced in removing the tree from the furniture

  5. #4
    Join Date
    Oct 2007
    Location
    Alexandra Vic
    Age
    69
    Posts
    2,810

    Default

    Pictures 2 and 3 show a pull cord rigged from the guard return spring to somewhere on the infeed end of the machine. I am not sure what your intention there is?
    The return spring should be permanently pretensioned so that the guard is always closed over the cutter head, and in contact with the fence face unless there is a piece of wood in the system, in which case the wood is against the fence on one side and the guard is against the otherside of the weed. The wood should push the guard away from the fence as it begins its pass over the cutter, but should replace it in ensuring that the cutters are not accessable to your hand.

  6. #5
    Join Date
    Jan 2012
    Location
    South Australia
    Age
    63
    Posts
    8

    Default

    Hi Rod,

    thanks for the welcome_the reason i bought it was because I have a great interest in traditional woodwork & antique's in general and I liked it .It will be a useful tool for me as well.

    regards

    Mark

  7. #6
    Join Date
    Jan 2012
    Location
    South Australia
    Age
    63
    Posts
    8

    Default

    hi Malb,

    thanks for your response,I'am aware of how to use a jointer, guard spring tension and safety procedures,the original tension section is missing .The make shift section with plumbers string and spring I have made works well,I can quickly adjust the guard spring tension when I need to adjust the fence guide ,which will be often.

    thanks

    regards

    mark

  8. #7
    Join Date
    Dec 2010
    Location
    Melbourne, Australia.
    Posts
    825

    Default Mystery machine....

    Quote Originally Posted by pmcgee View Post
    Hi Mark,

    I can't help but I'm also interested in the Paulcall brand.
    There's a damn good chance Matty has some knowledge about it.
    Paul
    Paul I gona have to let the team down on this one, I had a good long look on the net as well, plus many McPhersons Catalogs and came up with not a lot, not even a address in Australia where Paulcall manafactured, very puzzled about this tool maker as I recall a lot of tools being made by Paulcall, hand tools, clamp's machinery etc.
    A look through a 1966 McPhersons catalog did reveal a small bandsaw branded Paulcall, leading me to think Mark that your planer is not as old as you think.
    I will keep Looking....

    Melbourne Matty.

  9. #8
    Join Date
    Apr 2015
    Location
    Brisbane
    Posts
    304

    Default

    I know this is an old thread, but I have a Paulcall 6" planner/jointer and a 12" bandsaw that my father can no longer use. I now have them working again after being idle for a few years. Keen for any info about Paulcall.

    Dad purchased the bandsaw second hand. Not sure about the jointer but he had both for many years.

    Peter


    Sent from my iPad using Tapatalk

Similar Threads

  1. 10 inch blade in a 9 1/4 inch power saw ... The WIP
    By toddles in forum TRITON / GMC
    Replies: 4
    Last Post: 28th July 2007, 02:57 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •