Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2021
    Location
    Sunshine Coast, QLD
    Posts
    734

    Default Wadkin Super 500

    I bought this Wadkin over a year ago, it had a lot of surface rust which in places on the bed had pitted below the machined surface, but not enough to warrant the surface being milled.

    Wadkin seem to have dropped there traditional Tag's so it only shows a Machine Number S500 8/334 or maybe it says 81334, which could mean 1981 machine 334 (not sure)

    Attached some pics of me cleaning it up.

    Fence 1.jpg Fence 2.jpg Fence 3.jpg

    Fence rear.jpg Front Left.jpg Full Bed.jpg Wadkin Super 500 Tag.jpg

    Top Back Left.jpg Top Centre 2.jpg Top Centre.jpg

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2008
    Location
    Corndale
    Posts
    266

    Default

    Here is the tag from my Wadkin Super 500.

    S500 80301 are stamped into it.

    Maybe Vann can tell us what the number means as far as dates go.

    Quite surprising the differences between the 2 machines.

    Where did your machine originate from?



    Wadkin Name tag S500.jpg
    Cheers from Micheal.

  4. #3
    Join Date
    Nov 2021
    Location
    Sunshine Coast, QLD
    Posts
    734

    Default

    Quote Originally Posted by localele View Post
    Here is the tag from my Wadkin Super 500.

    S500 80301 are stamped into it.

    Maybe Vann can tell us what the number means as far as dates go.

    Quite surprising the differences between the 2 machines.

    Where did your machine originate from?



    Wadkin Name tag S500.jpg
    So if I am correct then your machine would be older than mine, it would make yours 1980 and number 301 of that year, (301 being the total number of all types of machines that Wadkin still made, not just the Super 500).

    I bought mine from near Newcastle NSW, it's a great machine and apart from the clean up everything still runs true.

  5. #4
    Join Date
    Sep 2008
    Location
    Petone, NZ
    Age
    68
    Posts
    2,817

    Default Some Guestimates and Some History.

    Quote Originally Posted by localele View Post
    ...Maybe Vann can tell us what the number means as far as dates go...
    Or not .

    My historic knowledge is with classic Wadkin machines built at the Green Lane works in Leicester, and interest begins to wane with the new machines introduced in the late 1950s (after the Bursgreen merger).

    As you can see on those tags, these machines are products of Wadkin-Bursgreen era and were manufactured at the former Bursgreen Colne factory. The former Bursgreen factories used a different numbering system.

    It is highly likely, but not definite, that the first two digits are the year of manufacture (1980 and 1981 respectively), and I would guess that the last three digits are the serial number for S-500s.

    That does not mean that these are the 301st and 334th S-500s built. We know for sure that Green Lane started most models at 105. But we don't know what Wadkin-Bursgreen practice was. Another possibility is that S-400s, for example, may have started at 001, S-500's at 201, and S-600s at 401. Green Lane did something similar with their RD buzzers with 12" and 16" models using different number series (eg 12" RDs ordered in 1939 were numbered 202 to 237, while 16" RDs ordered the same year were numbered 417 to 452).

    Unfortunately when Wadkin-Bursgreen Durham (the last of the former Bursgreen factories) closed, the staff were less than happy and most of their records went in the skip, with very little reaching Green Lane. They were especially unhappy because Durham was to be kept open and Green Lane closed, but a last minute decision reversed that.

    Cheers, Vann.
    Gatherer of rusty planes tools...
    Proud member of the Wadkin Blockhead Club .

  6. #5
    Join Date
    Sep 2012
    Location
    uk
    Posts
    456

    Default

    I've heard stories of the houghton le spring workers being really at production moving to green lane. They had the process dialled in and as efficient as it could be. A few workers relocated to leicester and it was a shambles, and lots of money was wasted. All because of some shirt and tie guy thinking he knew better.

Similar Threads

  1. Wadkin Super 500 parts manual
    By localele in forum ANTIQUE AND VINTAGE MACHINERY
    Replies: 36
    Last Post: 28th August 2023, 08:16 PM
  2. Wadkin PK - Can I fit a Single Phase Motor to a wadkin pk table saw?
    By Pommy Ker in forum ANTIQUE AND VINTAGE MACHINERY
    Replies: 17
    Last Post: 30th December 2015, 06:31 PM
  3. Wadkin PK manual link and other wadkin manuals
    By Pommy Ker in forum ANTIQUE AND VINTAGE MACHINERY
    Replies: 0
    Last Post: 29th December 2015, 07:56 PM
  4. Super simple, super cheap saw stabilization bracket
    By toddles in forum TRITON / GMC
    Replies: 3
    Last Post: 1st September 2006, 01:15 AM
  5. super gloss/super tough finish
    By WoodWad in forum FINISHING
    Replies: 2
    Last Post: 9th March 2003, 10:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •