Page 8 of 11 FirstFirst ... 34567891011 LastLast
Results 106 to 120 of 153
  1. #106
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,200

    Default

    Quote Originally Posted by Simplicity View Post
    I don’t think you will need your mobile workbench.


    Quote Originally Posted by Simplicity View Post
    At this stage it is yourself , Benny, and myself !!
    Three wise amigos, so we can decide to sit out the back on the BIG table, should be enough room [emoji849].
    Or we can cram into the creative zone(I have to clean up a bit).
    A cozy little group then. A pity more people can't make it, but I am sure that those who are there will get a lot out of it.

    Quote Originally Posted by Simplicity View Post
    Tools wise it seems you and Benny have done pretty good job on ruffling our your handles all ready.
    So ,I would suggest ,rasps ,files ,sander ,paper would be good.
    I have my small trim router if you want some timber taken off quickly around the tote.
    Our handles are cut out and edges sanded smooth and holes for sawnuts drilled, but not necessarily fitted. The aim was to get us to the point where we should be able to leave the GTG with a finished handle and there is still plenty of work there for both of us. If Benny's sawplate and brass back arrive in time from Blackburns, access to a drill press may be useful to drill the holes in the sawplate. Also a means to trim off the corner ot the sawplate to fit the handle would be nice if you have the means. If not I can bring something.

    Quote Originally Posted by Simplicity View Post
    I have enough vices(No that’s not funny [emoji23])
    To use for work holding.
    Well that may be the case but NOBODY EVER had enough clamps.

    Quote Originally Posted by Simplicity View Post
    Can’t think of anything else at this moment, but I’m waiting for my caffeine levels to balance out after the evenings sleep lol.
    I'm waiting for the weather to warm up a bit so I can get out into the shed and continue my sawnut production run
    I got sick of sitting around doing nothing - so I took up meditation.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #107
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,975

    Default

    Quote Originally Posted by doug3030 View Post




    A cozy little group then. A pity more people can't make it, but I am sure that those who are there will get a lot out of it.



    Our handles are cut out and edges sanded smooth and holes for sawnuts drilled, but not necessarily fitted. The aim was to get us to the point where we should be able to leave the GTG with a finished handle and there is still plenty of work there for both of us. If Benny's sawplate and brass back arrive in time from Blackburns, access to a drill press may be useful to drill the holes in the sawplate. Also a means to trim off the corner ot the sawplate to fit the handle would be nice if you have the means. If not I can bring something.



    Well that may be the case but NOBODY EVER had enough clamps.



    I'm waiting for the weather to warm up a bit so I can get out into the shed and continue my sawnut production run
    Have drill press plus lots of metal destroying equipment.
    Plus the little drill bit for 1095 spring steel,that stuff is hard.
    I will keep a eye on the weather the coming week because right now it’s wet cold and miserable here.

    Cheers Matt.

  4. #108
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,200

    Default

    Quote Originally Posted by doug3030 View Post
    I'm waiting for the weather to warm up a bit so I can get out into the shed and continue my sawnut production run
    Well I got out to make sawnuts but the disorganization around the lathe was hampering progress so I diverted my efforts to organize my workspace.

    I made this out of some Crapiata Scandanavia (the scientific name for timber reclaimed from an Ikea futon bed):

    20190331_134111.jpg
    20190331_134035.jpg

    Now all that stuff in it's rack is not lying under the lathe in all the swarf and coolant.

    Matt, What size is that drill bit?
    I got sick of sitting around doing nothing - so I took up meditation.

  5. #109
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,975

    Default

    Quote Originally Posted by doug3030 View Post
    Well I got out to make sawnuts but the disorganization around the lathe was hampering progress so I diverted my efforts to organize my workspace.

    I made this out of some Crapiata Scandanavia (the scientific name for timber reclaimed from an Ikea futon bed):

    20190331_134111.jpg
    20190331_134035.jpg

    Now all that stuff in it's rack is not lying under the lathe in all the swarf and coolant.

    Matt, What size is that drill bit?
    The Drill bit was from Blackburn tools
    It’s 3/16 or 4.7 mm.

    I’m 90 percent sure that is the same bit Doug, but not 100 percent sure.
    But once the hole is started it can be enlarged with a suitable rat tail file.

    Cheers Matt.

  6. #110
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,200

    Default

    Quote Originally Posted by Simplicity View Post
    The Drill bit was from Blackburn tools
    It’s 3/16 or 4.7 mm.

    I’m 90 percent sure that is the same bit Doug, but not 100 percent sure.
    But once the hole is started it can be enlarged with a suitable rat tail file.
    1095 sawplate is tempered to 48-51 Rockwell, I think.

    Your drill bit would be Carbide which would handle that ok, and once through, I could probably get one of my Cobalt drills to widen it a bit.

    The other possibility is to get out the MAPP torch and temper the part of the sawplate that will be inside the handle back a bit further and use a cobalt bit.
    I got sick of sitting around doing nothing - so I took up meditation.

  7. #111
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,975

    Default YOUR ATTENTION PLEASE, your attention.

    Quote Originally Posted by doug3030 View Post
    1095 sawplate is tempered to 48-51 Rockwell, I think.

    Your drill bit would be Carbide which would handle that ok, and once through, I could probably get one of my Cobalt drills to widen it a bit.

    The other possibility is to get out the MAPP torch and temper the part of the sawplate that will be inside the handle back a bit further and use a cobalt bit.
    1095 is hard
    It’s not so much what the drill bit is made of(I’m sure it’s just drill steel) it’s the cutting geometry of it.
    I can’t remember excalty what it’s called but it works very well.

    Doug don’t go near the saw plate with heat you will ruin it.

    Cheers Matt.

    Edit [emoji849] it’s called a spade bit,

  8. #112
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,200

    Default

    Quote Originally Posted by Simplicity View Post
    The Drill bit was from Blackburn tools
    It’s 3/16 or 4.7 mm.

    I’m 90 percent sure that is the same bit Doug, but not 100 percent sure.
    But once the hole is started it can be enlarged with a suitable rat tail file.
    Is this the one, Matt?

    Blackburn Tools - Solid carbide spade drill bits
    I got sick of sitting around doing nothing - so I took up meditation.

  9. #113
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,099

    Default

    Matt

    IanW put me on to the tungsten carbide, triangular, tile drills. They work very well, but don't press too hard before the hole starts to appear as the point can shatter. A reamer is the best tool for opening up the hole, but a chainsaw file can be substituted.

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  10. #114
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,975

    Default

    Quote Originally Posted by doug3030 View Post
    Yep [emoji41]

  11. #115
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,975

    Default YOUR ATTENTION PLEASE, your attention.

    Quote Originally Posted by Bushmiller View Post
    Matt

    IanW put me on to the tungsten carbide, triangular, tile drills. They work very well, but don't press too hard before the hole starts to appear as the point can shatter. A reamer is the best tool for opening up the hole, but a chainsaw file can be substituted.

    Regards
    Paul
    Paul,


    I’ve used the tile bits on tiles no problem use them all the time!
    I tried once on some scrap 1095 and couldn’t get it to work.
    From memory I tried it dry and also tried it with some cutting fluid(The metal work type) in a drill press.
    Do I need to revisit this black magic art form.
    It seems a very contentious issue when talking saw steel and holes[emoji849].

    Oddball would have the answer tho lol.

  12. #116
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,099

    Default

    [QUOTE=Simplicity;2133324]
    From memory I tried it dry and also tried it with some cutting fluid(The metal work type) in a drill press.
    Do I need to revisit this black magic art form.
    QUOTE]

    Matt

    Yes, I think you should. I have been looking at buying these drills (5mm) as they look more robust.

    https://www.smithandarrow.com.au/pro...mic-drill-bit/

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  13. #117
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,975

    Default

    [QUOTE=Bushmiller;2133328]
    Quote Originally Posted by Simplicity View Post
    From memory I tried it dry and also tried it with some cutting fluid(The metal work type) in a drill press.
    Do I need to revisit this black magic art form.
    QUOTE]

    Matt

    Yes, I think you should. I have been looking at buying these drills (5mm) as they look more robust.

    https://www.smithandarrow.com.au/pro...mic-drill-bit/

    Regards
    Paul
    Immmm !!!!
    Another internet tool site to look at.
    Looking at tools on line is almost becoming another hobby on its own [emoji849][emoji849][emoji849].

  14. #118
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,200

    Default

    I just cut the sawplate to fit the handle slot I cut the other day. Fits just nice. Happy with self.(Well I did it hours ago now but The forum still won't let me attach the photo. I will post it later if it ever lets me.)
    I got sick of sitting around doing nothing - so I took up meditation.

  15. #119
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,099

    Default

    Matt

    I have ordered some of those tile drills ( I thought I had better put my money where my mouth is) so at some time in the future I will have to report back on them. I have dealt with Smith & Arrow several times in the past mainly for sanding type products (flap discs, sander discs, angle grinder cutting discs etc) and other products including twist bits and have been very pleased both with the products and the level of service.

    At one time S & A were a Forum sponsor too, but a quick perusal of the sponsors no longer shows them listed.

    Regards
    Paul

    (Disclaimer: No personal or financial connection to this company)
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  16. #120
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,099

    Default

    Quote Originally Posted by doug3030 View Post
    I just cut the sawplate to fit the handle slot I cut the other day. Fits just nice. Happy with self.(Well I did it hours ago now but The forum still won't let me attach the photo. I will post it later if it ever lets me.)
    Doug

    I thought I was the only one who had problems connecting to the Forum. However I have not had a pic issue. Will look forward to seeing the pix as and when.

    On the subject of the original theme I think anybody who is hesitating about going to the GTG should give it a go. GTGs in general are very relaxed affairs and the wonderful aspect is meeting up with people whom you only know by name. The benefit is long term as down the track you see posts by people you now know: It brings so much more meaning to the Forum participation.

    Added to that, the theme of this GTG is just so good .



    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

Page 8 of 11 FirstFirst ... 34567891011 LastLast

Similar Threads

  1. pay attention!
    By choppit in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 6
    Last Post: 12th September 2013, 12:33 AM
  2. For your URGENT Attention
    By eskimo in forum METALWORK FORUM
    Replies: 4
    Last Post: 6th March 2012, 10:25 AM
  3. Attention Dave J
    By bollie7 in forum METALWORK FORUM
    Replies: 0
    Last Post: 20th January 2012, 08:52 AM
  4. Due care & attention.
    By Cliff Rogers in forum WOODIES JOKES
    Replies: 0
    Last Post: 18th September 2006, 11:29 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •