Thread: Friday lunch prattle

Originally Posted by doug3030

Why is it always Victoria?

It doesn't feel funny to make jokes at Victoria's expense this time. I'm truly sorry that you're having to go through this again. In this instance, it won't surprise me to find other states having to follow suite though.

It was because of of your plans Doug. How did you manage to spread the virus from Werribee See you at lunch time. I have been trying to spread my mate ashes in Qld. since before the first lockdown.

as we where discussing Building houses with oversized 3D printers

Giant 3D-printer builds a TWO-STORY house in one piece 🏡 - YouTube

The Most Innovative 3D Printed House In The World [Mense-Korte] - YouTube

There is a rabbit hole of videos out there.

Cheers

I talked about the mallets I made for my Veterans' group and the provenance of the timber used.

I mentioned that they were loosely based on a Paul Sellers design. Here's a link to the first of the three videos on how he makes them. I scaled mine down somewhat because I used heavy timber so I didn't need the size he did.

How to make a Joiners Mallet (part 1) | Paul Sellers - YouTube

Only Paul Sellers could make an hour and forty minutes of video out of such a simple project, but he does not miss a single detail.

Reminder for the Friday prattle and a call out to anyone with time to join in

Quote of the week: - The fact that the price must be paid is proof it is worth paying.


This weeks topic is: Do you build jigs for tasks?


Friday: Time: 12:00 - 12:40 AEST - or better Midday on the east coast, 11:30AM SA/NT, 10AM in WA, 2AM UTC and 9PM US Central (i think)
Yep that's lunchtime for some of us so bring a coffee and donut.


Join Zoom Meeting

Launch Meeting - Zoom

Meeting ID: 789 4886 9892
Passcode: 123

Cheers
Phil

I will not be a starter tomorrow.

I have an appointment to get my Covid jab at 12:30pm

I should be there.

Regards
Paul

Todays topic about jigs was largely stuck to once we agreed that a jig could also be a template

I showed of a draw slide spacing jigs i printed up specifically for the 5 draw cabinets under the new bench, all draw spacing is set in 100mm units.

These provide an easy way clamp the slide in place as well.
Consider the benchtop as the vertical side of the cabinet

P6040058.jpg P6040057.jpg

The white ones were designed based on the Goliath slides from Bunnings that are 45.4 wide, the bulk lot i got from ebay are just a little narrower at 43.6 so new set is being printed

Speaking of the cheaper versions... I ended up paying @11 per pair, they seem just as smooth as the Bunnings ones, have the number and style of ball bearings but definitely had a slightly oily feel when unwrapped so may be slightly better lubed.
Due to the "free" shipping the seller has shipped in multiple deliveries, so i got 10 pairs today with 10 pairs to come and no screws yet so before i link a source lets see how it pans out. they did message that they would be doing that.

Cheers
Phil

GAH! So sorry for missing today. I was in the shed, but forgot to set an alarm. I remembered at 12:46. In the off chance that you ran late I hoped on, but too late.

I expect to be hiking next week, so may see you the week after.

Originally Posted by LanceC

I expect to be hiking next week, so may see you the week after.

I might still see you next week Lance, lots of people have been telling me I should take a hike too

Reminder for the Friday prattle and a call out to anyone with time to join in

Quote of the week: - “You can never know everything, and part of what you know is always wrong. Perhaps even the most important part. A portion of wisdom lies in knowing that. A portion of courage lies in going on anyways.”.


This weeks topic is: Pencil lines, knife lines or "how it's about that long"... what's the best way to measure up?


Friday: Time: 12:00 - 12:40 AEST - or better Midday on the east coast, 11:30AM SA/NT, 10AM in WA, 2AM UTC and 9PM US Central (i think)
Yep that's lunchtime for some of us so bring a coffee and donut.


Join Zoom Meeting

Launch Meeting - Zoom

Meeting ID: 789 4886 9892
Passcode: 123

Cheers
Phil

For Lance:

This is my lathe. Happy to answer any questions you might have. https://www.machineryhouse.com.au/L689

For the markings/logos for your daughter's knives this bloke is the one who all the knifemakers use. Gelandangan Marking Systems - Gelandangan Marking Systems

The less than three hours to go reminder

Reminder for the Friday prattle and a call out to anyone with time to join in


This weeks topic is: Humidity and wood


Friday: Time: 12:00 - 12:40 AEST - or better Midday on the east coast, 11:30AM SA/NT, 10AM in WA, 2AM UTC and 9PM US Central (i think)
Yep that's lunchtime for some of us so bring a coffee and donut.


Join Zoom Meeting

Launch Meeting - Zoom

Meeting ID: 789 4886 9892
Passcode: 123

Cheers
Phil

Busy day - If I make it I make it.