Thread: Sunday Round Table Jabber - Sunday evening all welcome

Your shoulder goes out more than you do.

Sunday is hear again the end of the Week.

That means Sunday Night Jabber is yet once again.

All welcome, if your a member on this fine forum your welcome to join us.
It is a BYO gathering.

Tonight’s hot to trot subject matter(Not that we stick to it,but we do try)
Drum roll Please, its everything to do with Pen Turning so ,if your a turner ,turn up ,if your not a wood turner turn up anyway.
If you hate Pen turning turn up.
We may possibly have a almost professional Pen turner tonight drop in for a quick chat ,maybe !!!!!!


Start Time 7.30 ish AEST
That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

The Get together is held using Skype,you are able to join in by just joining as a Guest.

Https://join.skype.com/u73k1kv4B1UL


See Ya 7.30 ish Matt

Matt

All the best for the meeting. I have to work

Years ago I bought a pen turning kit, but have never used it. I would have to buy a set of lathe jaws small enough to grip the blanks before I became operational! I am thinking your "professional" may live very close by?

Regards
Paul

Originally Posted by Bushmiller

Matt

All the best for the meeting. I have to work

Years ago I bought a pen turning kit, but have never used it. I would have to buy a set of lathe jaws small enough to grip the blanks before I became operational! I am thinking your "professional" may live very close by?

Regards
Paul

Pau,
You don’t need a chuck or jaws to turn a pen,Sally turns a lot between centre’s.

You may be right about the “Professional”

My sympathies regarding work [emoji45][emoji45]

Sunday is hear again the end of the Week.

That means Sunday Night Jabber is yet once again.

All welcome, if your a member on this fine forum your welcome to join us.
It is a BYO gathering.

Tomorrow’s hot to trot subject matter(Not that we stick to it,but we do try)
Drum roll Please, what’s on the Bench,show us your latest creation,be it a small or large fantastic museum quality or its just something you have thrown together or it may be just some Dust.



Start Time 7.30 ish AEST
That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

The Get together is held using Skype,you are able to join in by just joining as a Guest.

Https://join.skype.com/u73k1kv4B1UL


See Ya 7.30 ish Matt


Sent from my iPad using Tapatalk Pro

Does it matter which bench, or do i have to pick one in advance

Originally Posted by Aussiephil

Does it matter which bench, or do i have to pick one in advance

Phil?
You can talk about what’s on ALL of them, we would just be content to have your fine company[emoji6].

Cheers Matt

A teaser shot for tonight’s gathering of Dark lords and Infidels others welcome to join in as well.



Cheers Matt.

Matt

I think I saw a saw there. I have something to convey on saw sharpening tonight: A minor break through for the visually challenged. Tune in and all will be revealed.

Regards
Paul

Originally Posted by Bushmiller

Matt

I think I saw a saw there. I have something to convey on saw sharpening tonight: A minor break through for the visually challenged. Tune in and all will be revealed.

Regards
Paul

I’m getting a Gin now(Any time is gin time) an taking a front row seat now,just need to find my glasses lol.[emoji6]

Cheers Matt.

This is the link to the Covid thread I mentioned in "The Prattle" tonight.

breaking covid rules - Page 9 (woodworkforums.com)

It started out as "breaking the rules" but has developed, nine pages later, into a general discussion, usually very restrained. The last post, # 131 contains the description of how serious coivid-19 can be and elaborates on the "four stages:" Disturbing to say the least.

I will post some headband magnifier details tomorrow. Running out of time tonight.

Regards
Paul

For some time the Optivisor headband magnifier made by Donegan has been the device that all others were judged by. The optics from the glass lenses are excellent, but it is on the expensive side. A quick glance on Ebay shows prices down around the $100 mark.

I saw through Cesdeals a similar item with multiple lenses for just over $40 and that is the headband I showed last night. The four levels of magnification are x1.5, x2.0, x2.5, x3.5.

Head Wearing Magnifier Glasses Loupes Portable Magnifying Headband Eyewear (cesdeals.com)

Another quick glance at Ebay shows what I think is the same item down as low as $22.50 !

I just selected the first that came up and it includes free postage:

Headband Magnifier Head Wearing Jeweler Reading Magnifying Glass Loupe Optivisor | eBay

This is the general search for headband magnifier:

headband magnifier | eBay

There is a practical limitation to how much magnification you can comfortably use to sharpen handsaws. As the magnification increases the focus range decreases and you find yourself on top of the blade with no room to move the saw file comfortably. My take is that x1.5 or x2.0 are the practical lenses, but I do use them in conjunction with my reading glasses too so there is small level of extra magnification.

So although I bought through Cesdeals, which was less than half the price of the Optivisor brand, it appears that through Ebay you can get these similar (knockoffs?) bands for around a quarter of the price and get the additional lenses. Probably worth a try if you are battling to see small teeth or indeed any other intricate work.

Regards
Paul

Sunday is nearly here again the end of the Week.

That means Sunday Night Jabber is yet once again.

All welcome, if your a member on this fine forum your welcome to join us.
It is a BYO gathering.

Tonight’s hot to trot subject matter(Not that we stick to it,but we do try)
Drum roll Please, is a check too see if one of our most esteemed members Pagie will view this, as he will be hosting this Sundays night Jabber.shhhhhh to all others.[emoji41]


Start Time 7.30 ish AEST
That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

The Get together is held using Skype,you are able to join in by just joining as a Guest.

Https://join.skype.com/u73k1kv4B1UL


See Ya 7.30 ish Matt


Sent from my iPad using Tapatalk Pro

Here is the link I promised to post on the Rockwell testing files

https://www.artisansupplies.com.au/p...ss-test-files/